毕业论文-某混凝土简支梁桥设计（方案C）.docVIP

某混凝土简支梁桥设计（方案C) PAGE 16 1 本科毕业设计 土木工程 某混凝土简支梁桥设计（方案C） The Design of a Simple-Supported Concrete Beam Bridge(Project C) 某混凝土简支梁桥设计（方案C) PAGE 15 某混凝土简支梁桥设计（方案C） 摘要：本设计是根据设计任务书和桥规，设计16m预应力空心板桥，对结构进行内力计算和配筋。 本设计的内容包括：桥梁上部结构、下部结构。上部结构的设计和计算包括：空心板截面的细部尺寸以及几何特性、作用效应计算、预应力钢筋的确定和布置、换算截面几何特性计算、承载力验算、预应力损失计算、最小配筋率复核等。下部结构的设计和计算即，对下部结构的支座、盖梁、桩基进行尺寸设计、计算和验算。 根据结构受力验算，该桥梁结构形式满足安全性、耐久性等要求，设计方案经济合理。 关键词：预应力混凝土；空心板桥；横向分布系数。 The Design of a Simple-Supported Concrete Beam Bridge (Project C) Abstract?: In this paper, a concrete simple-supported hollow slab bridge of 16m is designed according to the assignement of project and the design specification. And the steel bar was arranged according to the calculation of internal force.This paper includes outline of the upper structure and substructure of the bridge. The design and analysis of the upper structure includes?: the size and geometrical properties of the hollow slab, the calculation of section geometrical characteristics, bearing capacity, prestressed less, constructure deformation, checking computation of permanent,and so on. The design and analysis of the upperstructure includes of calculating and checking the steadier,bent cap and the stake. Based on the checking procedure results, the structure type of the bridge meets the requriement of the bridge design of safety, durability and so on. The design scheme is also economical and reasonable. Key words: prestressed concrete; hollow slab bridge; coefficient of transverse distribution. 目　录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc1984377461. 设计资料及构造布置 1 HYPERLINK \l _Toc1984377471.1跨度和桥面宽度 1 HYPERLINK \l _Toc1984377481.2技术标准 1 HYPERLINK \l _Toc1984377491.3地质条件 1 HYPERLINK \l _Toc1984377491.4设计依据 1 HYPERLINK \l _Toc1984377491.5主要材料 1 HYPERLINK \l _Toc1984377491.6设计参数 2 HYPERLINK \l _Toc1984377491.7结构设计 2 HYPERLINK \l _Toc1984377491.8空心板截面几何性质计算 3 HYPERLINK \l _Toc1984377592. 作用效应计算 5 HYPERLINK \l _Toc1984377512.1 永久作用效应计算 5 HYPERLINK \l _Toc1984377522.2 可变作用效应计算 6 HYPERLINK \l _Toc1