光盘播放机伺服技术的研究-电子和通信工程专业论文.docxVIP

摘要摘要 摘要 摘要 伺服技术是数字光盘技术的一项重要内容，它广泛应用于家用数字 光盘播放机(如CD、VCD、DVD机等)、光盘存储驱动器(如CD．ROM、 DVD—ROM等)等方面。本文研究了家用数字光盘播放机的聚焦伺服技 术和循迹伺服技术，主要有下述内容： (1)首先研究了数字光盘的结构和记录方式，指出了光盘本身影响聚 焦伺服和循迹伺服的主要因素。 (2)研究光学拾取头的基本原理和光盘信号拾取原理，简要分析了实 际的光学头聚焦伺服和循迹伺服的机械结构。 (3)研究聚焦伺服和循迹伺服的原理，包括误差信号的产生原因，检 测方法，初步探讨了聚焦伺服和循迹伺服的数学模型，并以实例说明了 伺服电路的工作过程。 (4)介绍松下伺服芯片组。 (5)提出采用松下伺服芯片组构成伺服控制系统的方案，并搭建其评 价实验平台。 (6)最后，对所提方案进行了实验验证，并给出实验结果及分析，得 出最终结论。 关键词 数字光盘 光学拾取头 聚焦伺服 循迹伺服聚焦误差信号 循迹误差信号 数学模型伺服芯片 摘要Abstract 摘要 Abstract Servo is an important subject of Digital Disk Technology．It is applied to digital optical disk player for home(such as CD，Video—CD and DVD player etc．)and optical memory driver(For example，CD—ROM，DVD—ROM etc．) and SO on．In this thesis，the technology of focusing selvo and tracking servo for digital optical disk player are studied．the main works are as follows： (1)The structure and recording mode of the disk iS studied firstly，then show what are the main factors ofthe disk itselfwhich influence the focusing and tracking servo． (2)Studying the theory of optical pickup head unit(OPU)a11d how to pickup the signal Oil．the disk．Based on these theories．it analyse the structure ofthe focusing and tracking device． (3)The principle of focusing servo and tracking servo is studied，including reasons of focusing／tracking error and how to check out these errors．Then show the models of the focusing and tracking servo，and diskribe the process which servo circuits do by examples． (4)Introduce the servo ICs ofMatsushita． (5)Show the scheme of servo system using of the servo ICs of Matsushita． Then build up a setting that Can validate the scheme． (6)Finally,use the setting to judge of the scheme and the results of the experimentation are giyen． Keywords： Didital optical disk OPU Focusing servo Tracking servo Focusing error signal Tracking error signal Model Servo IC ．II． 刖 刖 暑 随着光盘存储技术的迅速发展，家用光盘播放机等产品在我国日益 普及。目前国内基本上掌握了光盘播放机整机和光盘的生产技术，而且 技术水平较高，其相关技术的著作也很多。但就其关键技术——伺服技 术和解码技术——的研究还比较滞后，相应的核心器件——机芯和解码 芯片——主要依赖进口。本文就光盘播放机的伺服技术进行