基桩导纳曲线基频和动刚度的仿真分析-岩土工程专业论文.docx

II II Abstract In the pile-integrity testing, the time domain analysis is usually adopted to analysis of measured signals. In most cases, due to factors such as test condition, testing technology and so forth, the single time-domain analytical method can hardly meet the needs of engineering detection. Therefore, it is necessary to introduce the frequency domain analysis as a supplementary analysis of time domain. In this thesis, a simplified soil-pile dynamic model is adopted and we get the velocity admittance curves of sound piles through the function of harmonic response analysis in the ANSYS software. It also analyzes the phenomenon that the heterogeneity clay around the pile impact on the fundamental frequency of the velocity admittance curves (including resonance peak frequency difference and peak valley difference), and summarizes related law of changing. In this thesis, we analyze two respects of the application of the dynamic stiffness considering the effect of soil-pile interaction. One respect is calculating the bearing capacity of a single pile tanking use of the dynamic stiffness and the other respect is inferring structural integrity of a pile taking use of dynamic stiffness. To some specific pile-soil system, it compares the difference when calculating the bearing capacity of a single pile in different frequency. In inferring structural integrity of a pile, it sums up the law of changing of determining the type defects taking use of the dynamic stiffness and it also discusses that how to make use of dynamic stiffness to determine which defect is beneficial to the pile, which is unfavorable. Since the calculation model of this paper considers the effect of soil around the pile, the conclusion of this dissertation have a practice guiding significance in both pile integrity testing and detection and analysis of bearing capacity of pile, which are based on frequency domain analysis. Key words ： Mechanical impedance method Admittance curves Fundamental