嵌入式系统以太网接口电路设计摘要-副本.docxVIP

中北 大学 2012 届毕 业设 计说 明书 嵌入式系统与以太网接口设计 摘要 现实生活中， 许多的嵌入式系统设备已被广泛地应用， 由于当前硬件设计的问题，未嵌入网络连接模块， 使得这些嵌入式系统在使用上受到限制， 而添置新设备又需要很高的成本。本文设计的网络接入模块解决了嵌入式设备与以太网络的连接问题，在不改变嵌入式设备本身结构的情况下， 用户终端可以通过这个模块将现有的各种串口设备快速方便地接入网络， 从而实现仪器的远程控制、 远程数据终端的数据通信等功能。本设计方案利用 STM32芯片提供的系统资源和处理能力，加上 ISA 接口的 10 Mb/s 网卡芯片 RTL8019AS，通过编写一套精简的协议栈，并实现可靠的数据通信，从而达到低成本、可靠连接网络的目的。 关键词： 以太网，单片机， RTL8019AS 中北 大学 2012 届毕 业设 计说 明书 The Interface Design of Embedded and Ethernet Abstract In the real life, many embedded system devices have been widely used, but they have not embedded the network module owing to the current design problem. It makes these embedded systems limited in use and high expense will have to be paid if new devices should be added.The network access module designed in this thesis solved the problem of the connection between the embedded devices and the Ethernet. Under the circumstance that the structure of the embedded systems will not be changed, the user terminal can access the network fast and conveniently through the various serial devices existing in this module,thus realizing the remote control of the devices,the data communication of remote data terminal and other functions.This design scheme takes advantage of the system resources and the process ability provided by an STM and 10 Mb/s LAN chip RTL8019AS with ISA interface. Through code a concise set of protocol stack, reliable data communication realized and it also achieved the goal of low cost and reliable network connection. Keywords： Ethernet network，Embedded，RTL8019AS