挤压铸造模具标准件库的研究与实现-机械设计及理论专业论文.docxVIP

武汉理工大学硕士学位论文Abstract 武汉理工大学硕士学位论文 Abstract Wim the increasing application of nonferrous alloys and the development of special casting technology,squeeze castings are being used widely increasingl y．Thus the task of design and manufacture of squeeze casting dies becomes more and more onerous．which ask for aIl urgent design transf01TOation forln traditional style to the CAD technology．Therefore the SUbject of establishing 3D standard—part library of squeeze-casting dies is put for reducing the repetitive work of designer in the COUrSe of squeeze-casting dies’design，predigesting the design course，improving the efficiency and quality of CAD software,shortening the period of developing product． 0n the basis of the domestic and abroad research data and the situation about establishing standard·-part library,3D standard-part library of squeeze—casting dies is established with solid modeling methods of feature-based parameterized driving．This thesis analyzes the basic idea of developing standard．part library,introduces solid modeling methods of feature—based parameterized driving,and develops a practical 3D standard．part library of squeeze．casting dies with SolidWbrks 2005 as the developing platform，Visual Basic 6．0 as developing tool and Access database as tool of managing all the data of squeeze-casting dies standard parts． Through the study of this SUbiect，some results and COnclusions are drawn as follows： n1 This thesis puts forward the constitute structure of 3D standard．part library system of squeeze—casting dies and make some research in establishing methods of standard．part model library of squeeze．casting dies， standard—part model parameterized library as well as the user management system， (2)In the course of developing software system，the ADO database interfaee technique of Microsofl has been used in this thesis．in Order to solve the database linking problem，which speeds the runtime． f3、Dimension parameter of standard parts in the system is credible．Because all