机油泵性能试验台的研制及机理研究-车辆工程专业论文.docxVIP

南京理l：人学I-仔i?硕十学位论文 南京理l：人学I-仔i?硕十学位论文 机油泵性能试验台的研制及机理研究 Y 62484 2 摘 要 机油泵是发动机内部关键部件之‘，其压力特性、转速特性、流量特性将直接影 响发动机的基本性能。课题以南京菲亚特发动机机油泵为对象，开发了一套检测机油 泵基本性能的试验台。 论文在分析了试验台的研制目的、依据以及国内外研究现状后，根据FIAT 7．A2050／01机油泵性能试验和寿命试验标准，首先确定了试验装置原理，进行了机械 装置的设计，包括机械动力设计、传动装置设计、系统管路设计、油箱设计等；在此 基础卜，对系统测试所需的各种传感器进行了合理的选择，包括种类、型号、技术参 数、数量等；根据项目要求，对电气系统进行了合理设计，包括电控柜设计、电气元 件选择、控制系统设计、工控机选择、各种数据采集及数据输出板卡的选择等：为r 对整个试验台的运行进行控制，并对采集到的数据进行处理，编制了系统管理控制软 件，通过该软件能够生成用户所需的各种图表、报表。经委托厂家的实际运行，系统 达到了原设计指标要求。 关键词：机油泵，试验台，研制，机理 南京理{．天学下程颈+学位论文 南京理{．天学下程颈+学位论文 税浦聚性能试验台盼研制及枫理研究 ABSTRACT Oil pump is one of the key parts in engine；its characteristics of pressure，rev and flux will have great effect on the basic performance of engine directly．By putting the oil pump of Nanjing-Fiat as an object，a set of test bed was developed for testing its performance． After the research goal，standards and actuality of the test bed were analyzed，in this dissertation，the principle ofthis equipment was defined firstly，and its mechanical part was designed，based orl the criterion of Nanjing—Fiat 7，A2050／0l about oil pump performance． The design ofmechanical parts includes the design ofpower,gearing，pipeline，oil trunk etc． Based on this，all kinds of sensors that used during testing were selected rightly,including its types，models，technical parameters，quantity etc。And according to the demands ofthis item，a rational design was made on electrical system，which includes the design of controller cabinet，the selection of electric components，the design of controller,the selection of industrial control computer,the collection of atl data cards etc．1n order to control its running of the test bed and manage the collected data，a management and control soft system was designed，and by Which all charts and report forms Can be created．After 121n practically,the system was proven achieving all ofthe original design guidelines． Key words：oil pump，test bed，development，mechanism 声 声 暖 本学位论文憋我在导师的指导下取得的研究成果，尽我所知，在 本学俊论文孛，除了麓潋标浚霹致谢酶都分魏，不包含萁稳入魏经发 表或公布过的研