矩阵变换器-永磁同步电机系统直接转矩控制-电气工程专业毕业论文.docxVIP

Finally, the paper proposes a novel DTC strategy of MC fed PMSM drives based on the optimal vetor. The mapping relationships between the all MC switching states and the change rate of the torque and flux in the motor-side and the change rate of the input charge in the grid-side is analysed by the enhanced switching tables. Based on the tables, an optimal selection of switching states can be achieved. The proposed strategy allows the use of all MC switching states including the rotation vectors, and effectively controls input and output variables of the matrix converter.An MC-PMSM experiment setup is built to investigate the control performace of the conventional DTC strategy and three proposed DTC strategies. The results show that all of the proposed DTC strategies can solve the problems of conventional DTC strategy effectively, and they also can maintain the merits of fast torque response, no need of rotary coordinate, and so on. Therefore, the proposed theory and control strategies in this paper are supported and verified.KEY WORDS：Matrix Converter, Permanent magnet synchronous motor, Direct torque control, Torque ripple reduction目录第一章 绪论..................................................................................................................11.1 课题研究背景与意义......................................................................................11.2 直接转矩控制技术研究现状..........................................................................41.3 矩阵变换器调制与控制策略研究现状..........................................................91.4 论文主要研究内容........................................................................................14第二章 传统矩阵变换器-永磁同步电机系统直接转矩控制 ..................................162.1 永磁同步电机直接转矩控制........................................................................162.1.1 转矩及磁链方程..................................................................................162.1.2 直接转矩控制开关表..........................................................................192.1.3