脉冲开关器件RSD应用关键技术研究-软件工程专业毕业论文.docxVIP

华中科技大学硕士学位论文 华 中 科 技 大 学 硕 士 学 位 论 文 II万方数据 II 万方数据 Abstract Reversely Switched Dynistor have unlimited series to achieve high pressure, to withstand very high current rate of rise (theoretical di / dt is 100kA/μs), high peak current (250kA) and so on. Therefore, in pulsed power technology and other fields HVDC has great potential applications. However, to realize the full area of RSD opened, more stringent requirements for the trigger current. So explored efficient trigger circuit is the key issues of RSD application. First of all，this paper describes the structure of RSD, discusses the use of a reverse charge carriers injected into the pre-filled way of RSD opening mechanism and open the desired precharge normal amount of charge, to establish a circuit-level model of the RSD device. Secondly, introduced the principle of magnetic switches, and the establishment of a circuit-level model, and then designed a magnetic switch parametric test platform. Thirdly, commonly used trigger circuit of RSD is studied, and proposed method is based on the physical model of two order circuit (RLC) to study the pre-charging current of RSD, and found that reducing the pre-charge inductance can increase the pre-charge efficiency of RSD, and proves the correctness of these conclusions by computer simulation and experiment. Finally, based on the opening mechanism and the resonance trigger circuit findings, this paper proposes three methods (full bridge trigger, intense pulse trigger, and two-step method.) to improve the pre-charge. For example: first, with respect to the resonance trigger，the full-bridge modes using the switches to replacement the inductance, can effectively inhibit the trigger circuit current oscillations ,and enhance current amplitude, thereby enhancing the efficiency of the trigger circuit. Second, the intense pulse trigger mode, the amplitude of the current is increased while reducing the pre-charge time, thereby reducing the recombination loss in the per