河北工程大学土木工程学院毕业论文_轻钢结构构件工字型截面弯扭耦合分析.doc

河北工程大学土木工程学院毕业论文 DATE \@ M/d/yyyy 3/3/2018 河北工程大学土木工程学院毕业论文 2013年 PAGE 2 河北工程大学土木工程学院毕业论文轻钢结构构件工字型截面弯扭耦合分析 1 摘 要 钢结构在目前建筑各类结构中应用广泛，弯扭耦合问题是轻钢结构分析中所关注的重点问题之一，已有学者和研究人员对轻钢结构构件分析做了很多的研究，随着研究的深入，这种杆件弯曲和扭转之间的耦合效应越来越受到重视，尤其当这种杆件具有非对称断面且剪切的作用不可忽视的时候，必须考虑弯曲和扭转之间的耦合效应。 本文从国内外研究现状出发，对课题中将涉及到的有关方面研究成果进行系统介绍，进而指出了课题研究方向的重要性，为论文的展开奠定了基础。采用轻钢结构的一些理论，再利用哈密顿对偶体系对工字型截面轻钢结构构件进行弯扭耦合分析，编制相应的Matlab分析程序分析，为方案的确定和初步设计的完成提供较为准确的依据，并为这种方法的研究结果与其他方法尽心分析对比，对各种计算模型的优劣和适用范围进行评判。通过具体结构算例分析。本文研究使理论接近现实，更加具有现实研究意义，为结构设计人员提供一种新的分析结构的理论，也为工程中解决此类问题提供了一种新的方法。 关键词: 轻钢结构构件；工字型截面；弯扭耦合分析；插值积分法；哈密顿对偶体系；薄壁杆件 Abstract In the current structure of steel is widely used in all kinds of buildings , bending and torsion coupling light steel structure is the focus of the analysis of one of the issues , some scholars and researchers for light steel structure analyzes done a lot of research, as research, this rod bending and torsion coupling effects between the more and more attention , especially when this rod has an asymmetrical cross-section and shear can not be ignored , it must be considered between bending and torsion coupling effect. This departure from the research status of the parties involved in the project will be carried out systematic introduction of research results , and then pointed out the importance of the research direction for the paper launched the foundation. Using some of the theories of light steel structure , re-use of dual Hamiltonian system on the light steel structure shaped cross section for bending and torsion coupling analysis, analysis of preparation of the corresponding Matlab program analysis , for the program to determine the completion of the preliminary design and provide more accurate basis, and as a result of this approach dedicated analysis and comparison with other methods , a variety of computational models to jud