冷连轧机轧制温度模型及其影响因素的研究-机械设计及理论专业论文.docxVIP

燕山大学工学硕士学位论文Abstract 燕山大学工学硕士学位论文 Abstract With the development of modem technology,the quality of the cold rolled strip should be kept improving to satisfy the user’s demands．It is indicated that in order to improve the quality of the cold rolled products，how to get good surface quality and strip shape by controlling the rolling temperature properly during the rolling process has become one of the most important problems in the field． On the basis ofthe systematical analysis on the main factors that cause the temperature change of the rolled piece and rollers during the process of cold tandem rolling，this paper made a briefintroduction ofthe temperature change in the rolling process and its analytic methods．Meanwhile，it took the elastic deformation ofboth the rollers and the rolled piece into account．And the length and the average rolling force of every area were precisely calculated by dividing the deformed area into entry elastic area,plastic a∞a and outlet elastic area,on the basis of which the two main factors deformation heat and friction heat that caused the temperature change in the cold tandem rolling process were calculated． According to the practical parameters,the influences of the initial temperature of the hot rolled strip，heat·transfer coefficient,the air cooling heat-transfer coefficient between the last stand and the coiling machine were analyzed and the figures ofinfluencing rules were made． In the process of the temperature analyzing，on the basis of W．L，Roberts model，a new mathematical model of predicting the temperature of the strip from the entry to the outlet were established by combining the features of tandem roiling and the calculation of the deformation heat and the friction heat and taking the emulsion heat-transfer coefficient as a variable．Temperatures of representative coils were measured and compared谢tll the predicted values of the temperature calculating model and its forecasting precision was verified．On II Abstractthe Abstract the b