毕业论文--随车起重机吊臂参数化建模.docVIP

PAGE PAGE PAGE I PAGE PAGE 毕业设计 题目：随车起重机吊臂参数化建模 作 者 届 别 院 别 专 业 机械设计制造及其自动化 指导老师 职 称 完成时间 2015.05 PAGE PAGE I PAGE PAGE I 摘要 本文简要介绍了随车起重机的结构和特点，总体设计了随车起重机的性能指标以及关于各臂伸缩的原理计算。并对随车起重机的设计要点进行了简要说明。本文重点介绍了随车起重机伸缩部分的设计，分析随车起重机吊臂结构形状与底座、油缸之间的整体协调布置，从而达到结构紧凑和设计合理。 本次设计主要内容和要求：设计出具有一定重量的随车起重机完整的上车结构，绘制出上车装配图和基本臂的结构图。通过分析和计算，确定基本臂的截面形状及截面尺寸，设计每节臂的具体结构和臂之间的连接方式，设计整个起重臂伸缩方式。并且设计随车起重机上车实现起重臂伸缩，变幅所需的上车液压系统，设计选择合适的泵，油缸及阀等液压元件。其中，以臂的设计最为重要，对此作为重点考虑。 关键词：PRO/E；随车起重机；吊臂；参数化 PAGE PAGE III Abstract This paper briefly introduces the structure and characteristics of the overall design of truck crane, truck crane performance index and principle about the calculation of the telescopic arm. And the key points in the design of truck crane are briefly described. This paper focuses on the design of truck crane telescopic part, analysis between the crane arm oil cylinder shape with the base, the overall layout, so as to achieve a compact structure and reasonable design. The main contents and requirements of the design: design a certain weight of truck crane complete in structure, draw a chart on the assembly drawing and the basic arm.. Through analysis and calculation, to determine the section shape and size design of the basic arm, connecting mode between the concrete structure and the arm of each arm, the whole design of crane telescopic mode. And the design of truck crane telescopic boom on the implementation, the amplitude must boards the hydraulic system, select the appropriate pump design, hydraulic cylinder and valve and other hydraulic components. Among them, the arm design is most important, in this regard as a key consideration.Keywords: PRO/E； Truck Crane；Crane；Parameterization 目 录 TOC \o 1-3 \h \u 21169 摘要 I 17924 Abstract II 29267 一 概述 1 17984 1.1随车起重机的概念 1 15577 1.2随车起重机吊臂发展历史 1 19228 1.3 随车起重机国外发展水平与制约因素 2 11928 1.4我国随车起重机与国外随车起重机的差距 4 27654 1.5随车起重机的发展趋势 6 1032 二 吊臂的原理和参数 7 29518