日常工作流程.docxVIP

K NA 火焰光度计分析 Ca Mg 原子吸收分析法 Si Al Fe Ti: 比 色法 白刚玉， 棕刚玉， 碳化硅，  微粉，  抛光粉 ， 氧化铝， 莫来石 白刚玉产品知识 磨料包括：刚玉（棕白玉、白刚玉）、碳化硅（黑、绿）、石英砂、石榴石 微粉等。 白刚玉：白刚玉是以优质铝氧化粉为原料，经电熔提炼结晶而成， 纯 度高、自锐性好、耐酸碱腐蚀、耐高温、热态性能稳定，它硬度略高于 棕刚玉，韧性稍低，磨削能力强、发热量小、效率高。用其可制成磨具， 可适用于磨削高碳钢、高速钢及不锈钢等细粒度磨料；还可以用于精 密铸造和高级耐火材料。 White fused alumina is made from high quality alumina by melting above 2000℃ in the electric arc furnace and then cooling. It is with high purity, great self-sharpening, acid and alkali resistance, high temperature and stable thermal performance. Its hardness is a little higher than brown fused alumina. It is with low toughness, great grinding ability, small heat and high efficiency. It can be made to the abrasive, suitable for grinding high carbon steel and staining steel and other fine-grained abrasive; also be used for precision casting and high-refractory materials. Physical properties Chemical compositions Value of specifications (%) Hexagonal Al2O3 ≥99 Main crystal body: Al2O3 Al2O3 ≥99 Color: white Na2O ≤0.4 Grain density ≥3.9 g/cm3 Na2O ≤0.4 Bulk density 1.75-1.95 g/cm3 SiO2 ≤0.01 Morse hardness 9 SiO2 ≤0.01 Linear expansion coefficient（1/℃） 8.3x10- 4 Fe2O3 ≤0.03 Loss on ignition（%） ≤0.06 Fe2O3 ≤0.03 物理性能 化学成分 含量 (%) 晶体 六方体 Al2O3 ≥99 主晶体: Al2O3 Al2O3 ≥99 颜色: 白色 Na2O ≤0.4 真密度 ≥3.9 g/cm3 Na2O ≤0.4 堆积密度 1.75-1.95 g/cm3 SiO2 ≤0.01 莫氏硬度 9 SiO2 ≤0.01 线膨胀系数 8.3x10-4 Fe2O3 ≤0.03 灼减（%） ≤0.06 Fe2O3 ≤0.03 白刚玉喷砂磨料 性能及优点：  粒度砂 不影响加工件的颜色; 可在严禁铁粉残留的制程使用来喷砂; 微粉级非常适合湿式喷砂和研光作业; 加工速度快品质高; 所含氧化铁的量极低适合严禁铁质残留之喷砂作业; 6、经过酸洗步骤以除。 产品用途： 可用在各式喷砂和研光(Lapping)作业; 波丽或压克力艺品之雾化美感加工; 电视屏幕制程中喷砂; 硅晶元之切割; 齿模之清洁喷砂; 精密铸造用型砂; 高级耐火材料及其它陶瓷的添加剂; 产品包装：25KG/编织带 White fused alumina abrasives sandblasting Performance and advantages Not affecting the color of the processing cases; Sandblasting in the non-iron process; High speed processing and quality; Containing a very low amount of iron oxide, suitable for non-ferrous blasting operations; After acid washing steps. Usage: 1. Available research in a variety of blasting and light(lappi