香烟包装机推手装置的运动仿真分析外文文献翻译、中英文翻译.docVIP

外文资料翻译 院 系 专　　业 学生姓名 班级学号 外文出处 Advanced Materials Research?(Volumes 314 - 316) Analysis of the simulation movement in Cigarette packaging machine pusher Device Jujiang Cao1, a, Xiaohong Tian2, b and Long Li3, c 1,2,3 of Science Technology Xi’an, Shaanxi Province, China a jjcao@, btianxiaohong@, cllabc125@163.com Keywords: Cigarette pusher device, movement curve, acceleration, Pro／E Abstract. Researches and analyzes an advanced cigarettes in this paper, with the help of 3d modeling software pro/E image intuitively emulation produce its motion curves, and obtain the displacement, velocity and acceleration curve, Using the mechanism motion and kinematics analysis diagram, the mechanism kinematical process is analyzed which is laid a certain foundation for the further improved cigarette pusher device. Introduction Pusher device is an important component in cigarette packaging machine. It has two aspects function: one is to fold the shorter edges of aluminum foil bag top; Another is to push the foil tobacco package box paper together with wrapped round to trademark. Taking a cigarette packaging machine for example (as shown in figure 1) in this paper. The pusher is cam-link institutions and slider-crank composed of five-bar mechanism, cam-link mechanism to push folding aluminum foil on the short side up and down movement; Slider-crank mechanism to push aluminum foil tobacco package reciprocating movement before. After completing two top fold Angle and cigarette shorter edges; While keeping the aluminum foil tobacco package from a continuous movement and avoid collect conveying guide, continuous movement pushed smoke lugs[1]. Aluminum foil tobacco package under two top fold Angle and shorter edges folding is in motion, namely complete with reciprocating mode box back together in a fold reciprocating movement is under the action of fixed CAM swung repeatedly[2], then completes the folding action. Slider-crank mechanism of reciprocating mode box control the r