新型空气动力切割机外文文献翻译、中英文翻译、外文翻译.docxVIP

New air power machine The ship has extensive use of portable air plasma machine. it has been proved in the daily maintenance and repair of fact, the ship has a very useful. as a space or repair this machine is better than traditional oxygen of open-chain hydrocarbons with a cutting more convenient and security. In the distance and lack of oxygen of open-chain hydrocarbons with gas supply of oxygen of open-chain hydrocarbons with a difficult and cutting machine, the use of air plasma this difficulty is very easy to solve, because the latter only need to compress air and electricity. For many years, in the ship repairs, mainly rely on oxygen alkynyl cutting methods plate cutting. First will steel preheating temperature, then use to incandescent oxygen flow speed steel, iron oxide will cut and releases excessive heat, cutting slag to cutting area, only in appropriate conditions can be very smooth straight cutting edge. This method is usually limited to low carbon steel, cast iron can cut, but very difficult, this method can be used for cutting stainless steel, aluminum and non-ferrous metals. And you have to cut the torch for the purity 99.5% oxygen and acetylene gas, the fuel gas, etc, to supply by pipeline may also directly use the heavier high-pressure cylinders. Due to the oxygen risk, thus cutting alkynyl soon in the future will no longer use. Air plasma cutting machine only need electricity and compressed air, gas is heated to a high enough temperature, occurs, electrical conductivity, and ionization become plasma gas. In arc cutting and welding, become the current gas plasma medium to work. This gas is compressed air plasma torch heads, it through the holes and the advanced precision of temperature in highly compressed produces 10,000 degrees - 18,000 between the arc. In the current, high temperature and arc plasma gas high speed of three, steel and have a narrow slag melt quilting, which were blown away, in addition to a single blow cold air to help slag.