飞机轴承端盖冲压模具设计.docVIP

PAGE PAGE 2 飞机轴承端盖冲压模具设计 摘 要 本设计为飞机轴承端盖冲孔冲压模具设计。全文将设计思路作为一条主线贯穿始终，所采用的设计思路为：取得必要的资料对冲裁零件进行多方面的认识、分析，其中最重要的是对其进行工艺方面的分析。作好以上的工作之后，设计进入了最为核心、最为重要的一步，即对零件进行必要的工艺计算和确定模具主要工作零件的结构型式、相关尺寸。有了整个设计的核心灵魂后，然后对模具的其它组成零件完成设计，从而完善整个模具。综合上述的分析、计算、总体设计后，选好冲压设备，画好模具总装配图和各非标准零件图。整个设计思路是成一条脉络呈现的。 关键词：定位；冲孔；拉深；凹模；凸模。 ABSTRACT The spring fixing seat is mainly the function of shock absorption and buffering, but the processing technology of the existing spring seat is not perfect enough, and the blanking and drawing of the existing spring seat are finished according to the design of the die. Firstly, the material of the spring fixing seat is analyzed, and the 08 steel material is chosen, and the stamping process is analyzed. Remanufacturing process analysis on the structure of the spring seat, the design process of injection mold, stamping die, the blank size is calculated, and the layout design, determine the number of molding of the spring seat, determine the pressure and the number of edges, the drawing size is calculated, and the force of the stamping process what is needed to be calculated in order to ensure the mold can work normally need for the center of pressure is determined. Then the design of stamping mould design, selection and design of the spring seat type, the use of mould positioning, lead the way, and the design of the blanking die and drawing punch of the spring seat, and the various tolerances are calculated, finally completed the mold assembly drawing, and the mold the work process analysis, and ultimately determine the use of the mold design of the press. Based on the above research work, a feasible design method suitable for spring seat stamping die can be set up and applied in actual production. Keywords：Spring seat; stamping technology; die design PAGE 29 目 录 TOC \o 1-3 \h \u 30003 摘 要 II 4899 ABSTRACT III 1916 目 录 4 489 1.1 选题的研究目的和意义 6 1638 1.2 冲压模具的发展趋势 6 28431 2.冲裁零件的工艺性分析 7 7783 2.1 冲裁零件图 7 12632 2.2冲裁零件的工艺性分析 7 16076 3必要的工艺计算