WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0123 Selection and Specification of Heat Exchangers Design Guide.pdf
Selection and Specification of Heat
Exchangers Design Guide
Document No: KS-PR-DEG-0123 Rev 0
01 December 2019
© Copyright 2019 Worley ACN 096 090 158. No part of this document or the information it contains may be reproduced or transmitted in any form or by any
means electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without permission in writing from Worley.
Table of Contents
1. Introduction 5
2. Scope 5
3. Related Practices 5
4. Selection of Heat exchangers 6
4.1 General Selection Cons
您可能关注的文档
- WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0194 Steady State Heat Loss of Storage Tank Design Guide.pdf
- WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0193 Steady State Heat Loss of Flowing Fluid in Lines Design Guide.pdf
- WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0192 Steady State Heat Loss of Stagnant Fluid Design Guide.pdf
- WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0166 Avoidance of Vibration Induced Fatigue Failure Design Guide.pdf
- WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0165 Utility Summary Datasheet Design Guide.pdf
- WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0164 Diesel System Design Guide.pdf
- WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0163 Nitrogen System Design Guide.pdf
- WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0161 Instrument and Utility Air Systems Design Guide.pdf
- WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0160 Fresh and Potable Water System Design Guide.pdf
- WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0159 Sea Water and Heat Transfer Utility System Design Guide.pdf
原创力文档

文档评论(0)