电池外壳塑件成型模具设计说明书.docxVIP

电池外壳塑件成型模具设计 摘 要 针对该塑料制品的要求，了解塑件的用途，分析塑件的工艺性能、尺寸精度等各种技术要求 此说明书介绍了电池外壳注塑成型工艺分析以及模具设计。重点介绍了电池外壳的模具设计。该模具为单板式单分型面注塑模，因为模具的型芯型腔的结构尺寸不是很大，结构相对简单普通，所以型芯型腔结构可以采用组合式，能够利用数控铣、电火花、线切割等方式进行加工。电池外壳塑件采用的材料为abs，abs的材料使用性能优秀;成型工艺性能也很好。而且在考虑到实际生活的生产条件以及需求的情况下，在保证成型塑件质量的前提下，尽量降低成本，因此模具采用侧交口进料的方式，采用一模两件，注射机选用，有着合理的排气系统和良好的冷却系统。在此次模具设计的过程中，采用了UG三维造型的软件及技术，AutoCAD绘制电池外壳模具的总装图及各个部分的成型零件图，并编制各类零件的机加工工艺。 关键词：ABS；侧抽芯；侧浇口；一模2件；注塑模； Abstract According to the requirements of plastic products,understand the use of plastic parts,analyze the technological performance of plastic parts,dimensional accuracy and other requirements. This?manual?introduces?the?analysis?of?injection?molding?process?and?mold?design?of?battery?case.?The?design?of?the?mould?for?the?battery?case?is?mainly?introduced.?The?mold?is?a?single?format?single?parting?surface?injection?mold.?Because?the?mold?core?cavity?structure?is?small?in?size?and?simple?in?structure,?the?core?cavity?structure?can?be?combined?and?can?be?processed?by?digital?control?milling,?electric?spark,?wire?cutting?and?other?methods. The?plastic?parts?of?the?battery?case?are?made?of?abs,?which?has?excellent?performance.?The?molding?process?performance?is?also?very?good.?In?addition,?considering?the?actual?production?conditions?and?requirements?of?life,?and?on?the?premise?of?ensuring?the?quality?of?molded?plastic?parts,?the?cost?is?reduced?as?much?as?possible.?Therefore,?the?mold?adopts?the?way?of?side-to-side?feeding,?adopts?one?mold?and?two?pieces,?selects?the?injection?machine,?and?has?a?reasonable?exhaust?system?and?a?good?cooling?system.?In?the?process?of?the?mold?design,?UG?3D?modeling?software?and?technology?were?used.?AutoCAD?was?used?to?draw?the?assembly?drawing?of?the?battery?shell?mold?and?the?forming?part?drawing?of?each?part,?and?the?machining?process?of?various?parts?was?compiled. Keywords:ABS ;Side core pulling;Side gate;One mold and two pieces;injection mold PAGE 38 PAGE 1 目 录 TOC \o 1-3 \h \z \u 摘要 I 绪论 1