金属零件冲压模具设计设计说明书.docVIP

-- -- -- -- -- -- 摘 要 冲压工艺的冲压复合膜是冲压工艺的必备材料。一般来说，这种复合膜是由三层结构所需的材料借助粘合而成，具备良好的耐磨性、工作拉力、防腐防锈、防滑、抗磨损。阻力和其他品质和特性。在冲压加工中，将复合膜覆盖在金属板材上，可以起到减少摩擦、降低表面粗糙度、提高冲压件质量和延长模具寿命的作用。同时，复合膜材料还具有良好的隔热、隔音等特性，可以保护金属板材不会被过度加热或损坏。本文以止动片零件为主要研究对象。设计了一款冲孔落料复合模，主要进行以下工作： 从全球、国内的研究内容中查阅相关资料，对折叠模具的基本结构和目前主要加工方法的具体工艺有较详细的了解。 对止动片零件进行工艺分析，包括零件分析、工艺方案、模具结构分析及排样搭边。 对冲孔落料模具进行设计，包括冲压力、压力中新计算，并对落料凹凸模、冲孔凸模零件尺寸进行设计计算。 对冲孔落料模具进行了加工工艺设计，包括落料凹凸模、冲孔凸模、上下垫板等零件工艺。 对冲孔落料模具二维图按照计算尺寸进行绘制。 关键词：冲压落料模具；止动片零件；工艺分析 Abstract Stamping and blanking composite film is an auxiliary material used for stamping processing. This composite film is usually made of multi-layer materials through bonding, and has excellent wear resistance, pressure resistance, rust prevention, and slip resistance. In stamping processing, covering the metal sheet with a composite film can reduce friction, reduce surface roughness, improve the quality of stamped parts, and extend the lifespan of the mold. At the same time, composite membrane materials also have good thermal insulation, sound insulation and other characteristics, which can protect metal sheets from excessive heating or damage. The main research object of this article is the stopper parts. We have designed a punching and blanking composite die, which mainly performs the following tasks: 1. By consulting domestic and foreign research materials, I have a detailed understanding of the structure of punching and blanking molds and the current processing technology. 2. Conduct process analysis on the stopper parts, including part analysis, process plan, mold structure analysis, and layout overlap. 3. Design the punching and blanking mold, including the calculation of punching pressure and pressure, and design and calculate the dimensions of the blanking concave convex mold and punching convex mold parts. 4. We have designed the processing technology for the punching and blanking mold, including the blanking concave and convex mold, punching convex mold, upper and lower cushion plates, and o