嵌入式设备驱动程序设计嵌入式设备驱动程序设计81嵌入1.PPTVIP

【例8-2】一个简单的字符型设备驱动程序。1、驱动程序主要模块intDemo_open(){} ssize_tDemo_read(){}ssize_tDemo_write(){}intDemo_ioctl(){}intDemo_release(){}驱动程序demo_drv.c代码#includelinux/config.h#includelinux/kernel.h#includelinux/init.h#includelinux/fs.h#includelinux/devfs_fs_kernel.h#includelinux/module.h#defineDemo_MAJOR 98#defineDemo_DEBUG#defineVERSIONDemo_Driver“voidshowversion(void){printk(*********************************\n);printk(\t%s\t\n,VERSION);printk(********************************\n\n);}static intDemo_temp_count=0;/*Demo设备的读操作接口函数*/ssize_tDemo_read(structfile*file,char*buf,size_tcount,loff_t*f_ops){#ifdefDemo_DEBUGprintk(Demo_read[--kernel--]\n);#endifreturncount;} /*Demo设备的写操作接口函数*/ssize_tDemo_write(structfile*file,constchar*buf,size_tcount,loff_t*f_ops){#ifdefDemo_DEBUGprintk(Demo_write[--kernel--]\n);#endifreturncount;} /*Demo设备的ioctl接口函数*/intDemo_ioctl(structinode*inode,structfile*file,unsignedintcmd,unsignedlongdata){#ifdefDemo_DEBUGprintk(Demo_ioctl[--kernel--]\n);#endifreturn0;}/*Demo设备的打开设备接口函数*/intDemo_open(structinode*inode,structfile*file){#ifdefDemo_DEBUGprintk(Demo_open[--kernel--]\n);#endifMOD_INC_USE_COUNT;return0;} /*Demo设备的关闭接口函数*/intDemo_release(structinode*inode,structfile*file){#ifdefDemo_DEBUGprintk(Demo_release[--kernel--]\n);#endifMOD_DEC_USE_COUNT;return0;}/*Demo设备向系统注册操作功能，声明设备操作的功能接口函数*/structfile_operationsTest_ctl_ops={ open: Demo_open, read: Demo_read, write: Demo_write, ioctl: Demo_ioctl, release: Demo_release,};/*系统初始化*/staticint__initHW_Test_CTL_init(void){intret=-ENODEV;ret=devfs_register_chrdev(Demo_MAJOR,demo_drv,Test_ctl_ops);showversion();if(ret0){printk(Demo_modulefa