新型压型钢板-混凝土组合墙板内置支撑的构造和拟静力试验研究.pdfVIP

中国科技论文在线 新型压型钢板-混凝土组合墙板内置支撑的 构造和拟静力试验研究# 丁玉坤* 5 （哈尔滨工业大学土木工程学院） 摘要：介绍了闭口型压型钢板-混凝土组合墙板的构造，并对 4 个组合墙板内置无粘结单斜 形钢板支撑试件进行了拟静力试验研究。主要考察了压型钢板和腹板开孔的薄壁槽钢的设置 方式对试件滞回性能的影响。结果表明，薄壁槽钢的设置避免了墙板的局部冲切破坏。压型 10 钢板板肋平行支撑轴向设置时可以充分发挥墙板的抗弯能力,墙板没有弯曲破坏；而板肋沿 水平向布置的墙板较早弯曲破坏，当沿支撑长度方向将支撑周围压型钢板的水平板缝焊接 后，可避免墙板弯曲破坏。结合试件的受力性能和压型钢板的裁切，组合墙板制作中可以采 用板肋平行支撑轴线设置或板肋水平设置并同时焊接支撑周围水平狭缝的闭口型压型钢板。 关键词：钢支撑；组合墙板内置无粘结钢板支撑；压型钢板-混凝土组合墙板；闭口型压型 15 钢板；弯曲破坏；冲切 中图分类号：TU393 Constructional details and quasi-static tests for steel brace encased in a novel profiled steel sheet-concrete composite 20 panel DING Yukun (School of Civil Engineering, Harbin Institute of Technology) Abstract: Constructional details of a closed profiled steel sheet-concrete composite wall panel were proposed and four quasi-static tests were carried out to mainly examine the effects of details 25 of profiled steel sheets and thin-walled channels with perforated web on hysteretic behavior of the diagonal steel plate brace encased in the composite panel. Results reveal that the perforated channels can avoid the punching shear failure of panel. Besides, when ribs of profiled steel sheet were arranged along the axis of brace, bending capacity of wall panel was efficiently used and bending failure was avoided. However, bending failure of wall panel in which ribs of profiled steel 30 sheet were arranged horizontally occurred earlier. When horizontal seams of profiled steel sheet near the core brace were welded along the length of brace, bending failure of wall panel was also avo