IEC61850系统配置器的研究与VisualSCD的开发.pdfVIP

IEC61850 系统配置器的研究与VisualSCD 的开发 王炎初，胡剑锋，陆鑫，林庆农 （南瑞继保电气公司研发中心软件平台部，江苏南京，邮编 211102） The Research on the IEC61850 System Configurator and Development on VisualScd Abstract: IEC 61850 specifies a description language for the configuration of electrical substation 关键词关键词：IEC61850;SCL;SCD;变电站;IED;系统配 关键词关键词 IEDs. This language is called Substation 置;SCL 配置 Configuration description Language (SCL). Its main purpose is to allow theinteroperable exchange of communication system configuration data 1 引言 between an IED configurator and a system configurator from differentmanufacturers. The IEEE TC57小组制定了 IEC61850标准， System Configurator is an IED independent 作为基于通用网络通信平台的变电站自动 system level tool that shall be able to import or 化系统唯一国际标准，我国已经将其引入为 export configuration files defined by IEC 61850-6. 电力行业标准DL/T860，贯彻实施能提高我 The technologies related the system configurator 国变电站自动化水平，实现互操作性，从而 are first introduced and studied. we review the 降低系统复杂度和实施成本，提高系统的可 advantages and disadvantages of the domestic 靠性，具有重大的现实意义和社会意义[1]。 and foreign same products. Then we introduce IEC61850-6 规定了实现设备互操作性 the new developed visual system configurator 的变电站配置描述语言(SCL),该语言用于 named VisualSCD which has an dynamic SCL 根据 IEC61850-5 和 IEC61850-7 部分描述 syntax tree mapping from SCL’s XML Schema 智能电子设备的配置和通信系统。系统配置 files and visual graphics editor. VisualSCD has 器是一个独立于