变压器智能组件接口的研究.pdfVIP

变压器智能组件接口研究 1 1 1 1 2 任辉 ，樊陈 ，窦仁晖 ，倪益民 ，张斌 (1. 中国电力科学研究院，江苏省南京市，210003 ；2. 国网电力科学研究院，江苏省南京市，210003) A Study on the Interface of Integrated Intelligent Components for Transformer 1 1 1 2 REN Hui , FAN Chen , DOU Renhui1, NI Yimin , ZHANG Bin (1 China Electric Power Research Institute, Nanjing, 210003; 2 State Grid Electric Power Research Institute, Nanjing, 210003) Abstract: The paper describes a type of integrated 器进行状态分析和诊断，并与站控层直接通信。为满足 intelligent components for transformer, and discusses the 测控、输变电系统集成平台的需求，根据IEC 61850 完 network configuration, information model, internal and 善了变压器状态监测信息模型，建立变压器智能组件数 external communication interfaces of integrated intelligent 据模型，并提供多种接口（以太网、RS485 等）方式供 components. Integrated intelligent components read 组件内部信息交互使用，最后以统一的 MMS 服务实现 metrical information from GOOSE and SV network in 与后台的信息交互。 process level separately. Meanwhile, each on-line 关键词：智能组件；组网配置；状态监测；通信接口； monitoring unit sends the messages to relevant IED, IEDs 信息交互0 引言 connect to main IED in PCI style. Main IED develops state analysis and diagnosis on transformer, according to all the 0 引言 monitoring information, and communicates with station 变压器承载着电力系统中不同电压等级电 level directly. To meet the demand of integration platform 能的转换，同时承担电压、电流等重要信息的采 for measurement, control and monitoring, integrated 集与控制，是电力系统电力流、信息流传输的枢 intelligent components for transformer, which is based on 纽。变压器作为站内关键设备，长期经受电气、 IEC 61850, consummates the information of state 热、机械力、自