旋挖钻机桅杆建模仿真与试验分析.pdfVIP

第五部分 机械动力学 2 旋挖钻机桅杆建模仿真与试验分析 1,2 2 2 2 李永祥 ，罗慧 ，屈英民 ，车丽娜 （1.浙江师范大学，金华 321004 2.长沙中联重科上海分公司，上海 201600 ） 摘要：为提高旋挖钻机桅杆在工程施工中的稳定性和可靠性，采用三维实体造型软件 Pro/E 和有限元分析 软件分别对旋挖钻机桅杆进行三维实体建模和有限元模拟计算分析，揭示旋挖钻机在多种作业半径下桅杆 的变形分布规律以及最大变形；在此基础上，采用合理规划的旋挖钻机桅杆变形测试实验方法进一步论证 有限元仿真分析的可行性和有效性，分析结果显示桅杆在建模仿真分析中的最大变形能够与实际试验测试 结果保持一致，从而保证了旋挖钻机在整个施工过程中的施工安全可靠性和钻挖精度稳定性，同时为旋挖 钻机桅杆的进一步优化设计和研究提供了理论依据。 关键词：旋挖钻机；桅杆；有限元分析；滑轮 中图分类号：TU67 文献标志码：A 文章编号： Modeling and Simulation of the mast of rotary drilling rig and experimental research 1,2 2 2 2 LI Yong-xiang , LUO Hui , QU Ying-min , CHE Li-na (1. Zhejiang Normal University, Jinhua, Zhejiang, 321004 2.Changsha Zoomlion Heavy Industry Science Technology Development Co., ltd, Shanghai 201600) Abstract: This paper firstly carries the modeling ans simulating analysis of the mast of rotary drilling rig by means of the software of Pro/E and Ansys, to disclose the deformation regularity of the mast and maximum deformation under different working radius, in order to study and improve the stability and reliability of the mast of rotary drilling rig in the course of construction, and then rational experiment study is applied to prove the accuracy of Ansys for the mast of rotary drilling rig. Finally, the deformation results from the experiment coincide with that from the software of Ansys, which certifies the feasibility and validity of FEM simulation for the mast of rotary drilling rig. The method and experiment of this paper are provided for the process o