hydraulicreporttemplate-wsdot（hydraulicreporttemplate wsdot）.docVIP

HYDRAULIC REPORT TEMPLATE AND CHECKLIST FOR WSDOT NORTHWEST REGION (January 2009 version / Updated July 1, 2009) This template and checklist replaces the earlier Northwest Region Stormwater Report Template and Checklist, which had provided for sections containing the hydraulic and hydrology documentation; and Temporary Erosion and Sediment Control (TESC) information required for Agency and Developer construction activities within State right of way. This present template now contains only the hydraulic and hydrology elements needed in the development of Hydraulic Reports. For the TESC elements another template may be used for Northwest Region projects available at: /northwest/utilities/Forms/Word/TESC_template.doc This Hydraulic Report Template and Checklist is an informational guide for preparing and reviewing WSDOT Northwest Region Hydraulic Reports, and has been revised to be consistent with the September 18, 2008 Hydraulic Manual update and 2008 Highway Runoff Manual. It contains items considered important for inclusion within hydraulic and permanent water quality documentation when preparing and completing full designs and contract Plans Specifications and Estimates (P.S. E.). For a complete listing of report requirements, consult the current hydraulic design references contained within WSDOT’s Design Manual, Hydraulics Manual, Highway Runoff Manual, Environmental Procedures Manual, and Plan Preparation Manual. This checklist may be updated with changes posted on the Northwest Region Environmental Office website at: /Northwest/Environment/default.htm The previous Stormwater Report format may continue to be submitted for initial review through 2009. Projects with Ad dates after March 4, 2010 must comply with the 2008 Highway Runoff Manual, which is one year from the effective date of the WSDOT’s NPDES Municipal Stormwater Permit (March 4, 2009). Projects that require an individual Section 401 Water Quality Certification already need to meet