富鑫煤矿矿井设计.doc

六 月 摘要 本设计的矿井为富鑫煤矿，全设计共分为十章，分别为：矿井概况、井田境界和储量、矿井的工作制度、设计能力及服务年限、井田开拓、准备方式——采区巷道布置、采煤方法、井下运输、矿井提升、矿井通风及安全技术、设计矿井经济技术指标。 井田的走向长约3.4km，倾向长约2.4km，井田面积为4.8517km2。可开采的煤层是6号和15号煤层，主采的煤层为15号煤层，煤层倾角为5~14°，煤层平均厚度为5.93m。 井田中心附近布置主斜井、副斜井以及回风斜井；沿煤层顶板布置三条大巷，分别为运输大巷、轨道大巷及回风大巷。 井田的工业储量为2620万t，可采储量为1150万t,矿井的设计生产能力为0.6Mt/a。采用的采煤方法为走向长臂采煤法，采煤工艺为综采放顶煤采煤工艺；采访比为1:1.7。 井田的开拓方式为斜井单水平开拓，采用胶带输送机运煤，矿车辅助运输。矿井的通风方式采用中央并列??；年工作日为330天，工作制度为 “三八制”。 关键词：斜井开拓；采区；放顶煤；中央并列式通风  ABSTRACT The design of the mine is fuxin Colliery, Whole design is divided into ten chapters, namely: Mine Overview, Ida realm and Reserves, Work systems, design capability and service life of the mine,Ida pioneering, Prepare the way - Roadway layout, Mining Method, Underground transport, Mine Hoist, Mine Ventilation and Safety, Mine design economic indicators. Mine trend about 3.4km, about the tendency of 2.4km, Ida area 4.8517km2. Mineable coal seams is 6 and # 15 coal seam, the main mining coal seam 15 seam, an inclination of 5 ~ 14 °, the average coal seam thickness of 5.93m. Mine centrally disposed near the main slope, Vice Inclined Shaft and return air; arranged along three main roadway coal seam roof, namely transport roadway, rail roadway and return air roadway. Mine industrial reserves of 26.2 million t, recoverable reserves of 11.5 million t, mine design and production capacity of 0.6Mt / a. Mining method used is to the long arm of the mining law, mining technology for the fully mechanized coal caving mining technology; interviews ratio of 1: 1.7. Mine inclined to open up the way for the single level of development, the use of belt conveyor coal, cars auxiliary transport. Mine ventilation using a central Parallel; in days of 330 days, work systems for the three eight system. Keywords: Inclined to open up; Mining area; Caving coal; Center juxtapose ventilation  目录 TOC \o 1-3 \h \u  HYPERLINK \l _Toc13680 引言  PAGEREF _Toc13680 1  HYPERLINK \l _Toc7072 第一章 矿井概况  PAGEREF _Toc7072 2  HYPERLINK \l _To