DCS远程专家指导系统的设计与实现.pdfVIP

技术应用 陕西电力 2014年第42 卷第 12 期 2014 , Vo l. 42 No.12 SHAANXI ELECTRIC POWER Technology Application DCS远程d专家指导系统伦银针局实乱 潘卫华，刘伟娜，李振波 (华北电力大学控制与计算机工程学院，河北保定 071300) 摘 要:据DCS网络安全相关规定，DCS不允许直接联网，电厂设备运行一旦出现问题只能邀请专家亲临指导，严 重影响了电厂的安全运行。 DCS专家指导系统采用采集端-服务器-专家端3部分交互实现专家指导，利用采集卡 将图像数据采集到允许联网的机器上，对图像数据进行一系列压缩、识别等处理，将得到的最小图像数据公网传 输到异地专家面前，分别在B/S 、 C/S模式下进行了实现。本系统的实现既保证了DCS安全性的要求，同时使电厂设备 出现的问题可以被实时地解决，具有很好的时效性和经济性，为电厂设备的稳定运行提供了强有力的保障。 关键词:DCS; 专家指导;图像处理;图像传输;B/S;C/S 文献标志码:A 文章编号:1673-7598(2014)12-0060-03 中图分类号:TP182 Design and Realization of DCS Remote Expert Guidance System PAN Weihua ,LIU Weina ,LI Zhenbo (School of Control and Computer Engineering, North China Electric Power University , Baoding 071003 , China) Abstract: Accordìng 10 the relevanl provìsìons of DCS network security , the DCS ìs unable to realìze the remote expert guìdance as ìt ìs not allowed to connect the nelwork dìrectly , which causes a lot of problems and seriously affects the safe operation of power plant. The DCS expert guidance system implements the expe此 guidance by adopting the interaction of sampling terminal , server and expert termìnal. Data acquisition card is used to acquire and transmit images onto a machine connected to the network. A series of the images compression and recognition is performed to obtain and Iransmit the minimum image data to the remote expert. The system is realized based on B/S and C/S mode and of high timelines and economy , which not only ensures the DCS security requirements , but also solves the problems occurred in the power plant in real time. Key w