难变形材料真空环境热拉深系统的开发与应用.pdfVIP

Available online at E11111当 _- Transactions of , I~ -;; ScienceDirect Nonferrous Metals Science Society of China ELSEVIER Press Trans. Nonferrous Met. Soc. China 22(2012) s254-s260 Development of thermal deep drawing system with vacuum environment for difficult-to-deformation materials MENG Bao, WAN Min, WU Xiang-dong , ZHOU Ying-ke School of Mechanical Engineering and Automation , Beihang University, Beijing 100191 , China Received 28 August 2012; accepted 25 October 2012 Abstract: The thermal deep drawing process with vacuum environment was put forward to solve the problems in the forrning of the hîgh strength and difficult-to也formation sheet metals such as dîfficult to form under normal temperaωre and easily to be oxidized at high temperaωres. The vacuum hot drawing system was discussed and developed based on the integration of vacuum heating technology and variable blank holding force (BHF) system, which consisted of main丘ame system, hydraulic system, vacuum system, h巳ating system, water-cooling system, air-cooling system and computer control system, and the key parameters such as temperature , BHF and punch velocity were regulated în real tîme using PID closed-Ioop control technique. The deep drawing test of2.0 mm-thîck