按键扫描与LED显示驱动芯片ET6218R芯片资料.pdfVIP

Etek ET6218R Microelectronics LED Controller/driver General Description ET6218R is an LED Controller driver on a 1/7 to 1/8 duty factor. 7 segment output lines, 4 grid output lines, 1 segment/grid output lines, one display memory, control circuit, key scan circuit are all incorporated into a single chip to build a highly reliable peripheral device for a single chip microcomputer. Serial data is fed to ET6218R via a three-line serial interface, ET6218R pin assignments and application circuit are optimized for easy PCB Layout and cost saving advantages. Features CMOS Technology Low Power Consumption Multiple Display Modes(4～5 Grid, 7～8 segment) Key scaning(7×1 Matrix) 8-step Dimming Circuitry Serial Interface for Clock, Data Input/Output, Strobe Pins Available in 18-pin, DIP Package Pin Configurations Rev 1.0 2012-4-13 1/15 ET6218R Pin Description Pin No. Pin Name I/O Description Data I/O Pin(N-channel, Open-Drain) This pin outputs serial data at the falling edge of the shift clock and 5 DI/O(DINDOUT) I/O inputs serial data at the rising edge of the shift clock(starting from the lower bit) Clock Input Pin 6 CLK I This pin reads serial data at the rising edge and outputs data at the