串口和并口及引脚定义（国外英文资料）.doc

串口和并口及引脚定义（国外英文资料） The difference between serial and parallel Reward points: 0-resolution time: 2006-10-19 10:01 What is the difference between a computers 25 and nine stitches Questioner: the gr_honey - iii best answer rs-232 serial interface definition The computer side is 25 stitches: The side of the device is 25 stitches: Pin definition The Pin Name ITU - T Dir Description 1 GND 101 shields Ground 2 TXD 103 Transmit Data 3 RXD 104 the Receive Data 4 the RTS 105 Request to Send 5 CTS 106 Clear to Send 6 the DSR 107 Data Set Ready 7 GND 102 System Ground 8 CD 109 Carrier Detect RESERVED RESERVED 11 STF 126 Select the Transmit Channel 12 S.C D? Secondary Carrier Detect 13 S.C TS? Secondary Clear to Send 14 S.T XD? Secondary Transmit Data 15 TCK 114 Transmission Signal Element Timing 16 S.R XD? Secondary the Receive Data 17 RCK 115 Receiver Signal Element Timing 18 LL 141 Local Loop Control 19 S.R TS? Secondary Request to Send 20 DTR 108 Data Terminal Ready 21 RL 140 Remote Loop Control 22 RI 125 Ring Indicator 23 DSR 111 Data Signal Rate Selector 24 XCK 113 Transmit Signal Element Timing 25 TI 142 Test Indicator The serial port on the PC/AT machine is 9 pins, and the pins are defined as: The Pin Name Dir Description 1 CD Carrier Detect 2 RXD the Receive Data 3 TXD Transmit Data 4 DTR Data Terminal Ready 5 GND System Ground 6 the DSR Data Set Ready 7 the RTS Request to Send 8 the CTS Clear to Send 9 RI Ring Indicator The serial port on the PC/XT machine is 25 pins, and the pins are defined as: The Pin Name Dir Description 1 shields - shields Ground 2 TXD Transmit Data 3 RXD the Receive Data 4 the RTS Request to Send 5 CTS Clear to Send 6 the DSR Data Set Ready 7 GND - System Ground 8 CD Carrier Detect 9 n/c - 10 n/c - 11 n/c - 12 n/c - The 13 n/c - 14 n/c - 15 n/c - 16 n/c - 17 n/c - 18 n/c - 19 n/c - 20 DTR Data Terminal Ready 21 n/c - 22 RI Ring Indicator 23 n/c - 24 n/c - 25 n/c - PC parallel interface definition The PC parallel interface looks like 25 pin socket