矿山机械简答（Use the mining machinery）.docVIP

矿山机械简答（Use the mining machinery） 61.L type air compressor, the two systems used lubrication? What is the function of lubrication? Answer, drive mechanism lubrication and cylinder lubrication, cylinder lubrication can reduce the piston and cylinder mirror surface friction resistance, reduce wear and tear, but also can play a certain cooling effect What are the advantages of the two stage compressor adopted in the 60. stage compressor? Answer (1) to save power (2), reduce the exhaust temperature (3), improve the air compressor exhaust (4), can reduce the piston force (5), the intermediate cooler can separate part of oil and water, improve the quality of compressed air. What is the reason that the 59. piston compressor adopts two stage compression? A. (1) the compression ratio is limited by the clearance volume (2), and the compression ratio is limited by the oil temperature of the cylinder 51. what is the difference between centrifugal fans and axial fans? The centrifugal fan is the air flow into the impeller along the axial direction, in the impeller to radial outflow, axial flow fan is the gas into the impeller along the axial direction, still flow along the axial direction after the impeller. 47., pump running, but not out of water may be what are the reasons? A. (1) is not filled with water or valve leakage (2) packing box or vacuum gauge junction leakage (3) pump speed is not enough (4) valve open or water filter clogging pump (5) turn right (6) the height is too large 43. how many kinds of adjustment methods are there to change the pipe characteristic curve? Answer: (1) gate throttling method (2) pipe parallel adjustment method 42. how many kinds of regulation methods are there to change the characteristic curve of pump? Answer. (1) change the speed adjustment method (2) reduce the impeller number adjustment method 41.D type pump side with packing seal to ensure leak? Why? Answer: to ensure the leak, the drainage side packing seal to prevent leakage of high pres