桥梁多选题（Bridge multiple-choice questions）.docVIP

桥梁多选题（Bridge multiple-choice questions） The test of bridge and culvert engineering is subject to multiple choice 1. The following projects (CDS) are the main projects. A, protection engineering B, lead engineering C, foundation and lower construction D, small bridge 2. Test scores of measured items are usually adopted (AB). A, mathematical statistics method B, qualified rate method C, expert grading method D, supervision staff grading method 3. The selection of the rebound zone shall be consistent with (ABC). A. The area of the measuring area is generally not less than 10 B and the area of the measuring area is 20 times 20cm2 C. Avoid exposed iron parts and avoid rough aggregates 4. When the ultrasonic method detects shallow cracks, attention should be paid to (AD). A. No water or cement or other inclusions B and transducer must be arranged in symmetrical fracture axis C. No main reinforcement should be found in concrete, and the crack direction should be close to the line 5. The appearance of stone materials used in bridge and culvert works is required to be (ABC). A, the stone should be uniform B, not easy to weathering C, no crack D, shape square 6. The test results provided by anchor and clamping static load anchorage test have (AB). A, the anchorage efficiency B, the total strain of the measured limit stress C. Drag loss D, fatigue strength 7. The hot rolled steel test project includes (ABD). A, yield strength B, limit strength C, relaxation rate D, elongation 8. The inspection item of the rebar flash butt joint inspection includes (ABD). A, tensile test B, cold bending test C, elongation D, appearance inspection 9. The current uniform test of resilience is not suitable for the following (AB) conditions. A, special shaped concrete B, concrete with concrete C, thin-walled concrete member D, large volume concrete 10. The test items of the stone anti-freezing test include (BC). A, compressive strength B, frost resistance coefficient C, mass loss rate D, water abso