基于ECA规则和事物特性表的产品配置模型.pdfVIP

浙江大学学报{工学版) 、 l 第 40 卷第 5 期 Vol. 40 No. 5 2006 年 5 月 Journal of Zhejiang University(Engineering Science} May 2006 基于 ECA 规则和事物特性表的产品配置模型 顾巧祥，纪杨建，祁国宁，苏少辉，鲁玉军 (浙江大学现代制造工程研究所，浙江杭州 310027) 摘 要:针对按订单制造和按订单设计产品的特点，采用 event-conditÎon-action(ECA) 规则和事物特性表建立产品 配置模型.设计人员根据 ECA 规则对组成产品族的必选模块和可选模块进行选择，得到定制产品的结构;借助于 模块的事物特性表对其进行变型设计，即可快速得到个性化的定制产品.结合工业汽轮机的配置设计，给出了汽轮 机本体中汽缸部分的配置模型和实例.该配置模型不仅有利于提高产品配置效率和配置成功率，而且还可以保证 产品全生命周期中数据的一致性. 关键词:配置模型;ECA 规则;事物特性表 中图分类号: TP14;TP31 文献标识码:A 文章编号: 1008 - 973X(2005)05 - 0753 - 06 Product configuration model based on ECA rules and tabular layouts of article characteristics GU Qiao-xiang , JI Yang-jian , QI Guo-ning , SU Shao-hui , LU Yu-jun Unstitute of Contemþorary Manufacturing Engineering , Zhejiang University , Hangzhou 310027 , China) Abstract: Aimed at the characteristics of make-to-order and engineer-to-order product , the product config- uration model was proposed , for which event-condition-action (ECA) rules and tabular layouts of article characteristic (TLAC) were used. The structure of customization product could be generated through se- lection of indispensable modules and optional modules according to ECA rules; the individual product could be designed quickly using TLAC of the modules. Associated with the configuration design of steam tur- bine , the configuration model of cylinder and its instances were presented. The model has advantages in enhancing the efficiency and success rate of product configuration , and in ensuring the consistency of prod- uct data in its lifetime. Key words: configuration module; ECA rul巳s; tabular layo