中温煅烧分离回收钒冶炼废渣硫酸铵与硫酸钠.docVIP

中温煅烧分离回收钒冶炼废渣硫酸铵与硫酸钠.doc

  1. 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
  2. 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  3. 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  4. 4、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  5. 5、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  6. 6、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  7. 7、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
中温煅烧分离回收钒冶炼废渣硫酸铵与硫酸钠

中温煅烧分离回收钒冶炼废渣硫酸铵与硫酸钠 谢世前 余江 陶红群 冉宗信 王亚婷 郭欣 彭炜东 四川大学建筑与环境学院 四川大学新能源与低碳技术研究院 成都市环境保护科学研究院 X 关注成功! 加关注后您将方便地在 我的关注中得到本文献的被引频次变化的通知! 新浪微博 腾讯微博 人人网 开心网 豆瓣网 网易微博 摘????要: 以攀枝花炼钢厂沉钒废渣 (提取钒后冶炼废渣) 为原料, 采用预处理、中温煅烧和回收硫酸钠硫酸铵处理工艺, 探讨原料水分及颗粒大小、煅烧温度、煅烧时间以及搅拌次数等对硫酸钠和硫酸铵混合结晶物产品纯度及有效回收率的影响.通过正交试验, 确定了比较理想的分离回收工艺条件为:干燥温度120℃, 干燥时间1 h, 干燥后原料中水分可由18.9%降至5.0%;煅烧温度为400℃, 煅烧时间3 h, 搅拌3次.分离所得硫酸钠和硫酸铵的纯度分别可达到90.56%和94.41%, 有效回收率分别为91.31%和21.51%.通过此方法分离产物硫酸铵与硫酸钠可用作生产原料, 实现固废资源化, 避免环境污染. 关键词: 化学分离工程; 硫酸钠; 硫酸铵; 尾矿废渣; 中温煅烧; 资源回收; 作者简介:谢世前 (1985—) , 男, 四川大学硕士研究生.研究方向:环境规划与管理.E-mail:757859308@ 收稿日期:2017-05-05 基金:国家自然科学基金资助项目 Separation and recovery of ammonium sulfate and sodium sulfate from vanadium smelting residues by medium temperature calcinations Xie Shiqian Yu Jiang Tao Hongqun Ran Zongxin Wang Yating Guo Xin Peng Weidong College of Architecture and Environment, Sichuan University; Chengdu Environmental Protection Science Research Institute; Abstract: Taking the precipitated vanadium waste residue, which is smelting slag after extracting vanadium from Panzhihua Steel, as raw materials, and by using the techniques of pretreatment, medium temperature calcination and recovery of sodium sulfate ammonium sulfate, we explore the effects of material moisture content, particle size, calcination temperature, calcination time and stirring number on product purity as well as the recovery efficiency of mixed crystals of sodium sulfate and ammonium sulfate. The ideal separation recycling process conditions is obtained by orthogonal test. The optimal drying process parameters are drying temperature of 120 ℃, drying time of 1 h, by which the moisture in the raw material could reduce from 18. 9% to 5%. The optimal calcination process parameters include calcination temperature of 400 ℃, calcination time of 3 h, stir of 3 times. Finally, the purity of segregatesodium sulfate and segregate ammonium sulfate could reach 90. 56% and 94. 41%, respectively; and their recovery efficiency is

文档评论(0)

zijingling + 关注
实名认证
文档贡献者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档