综采面过长延展大落差正断层回采技术研究.docVIP

综采面过长延展大落差正断层回采技术研究 王玉新 陈慧明 杨月飞 河南能源化工集团永煤公司车集煤矿 X 关注成功！ 加关注后您将方便地在 我的关注中得到本文献的被引频次变化的通知！ 新浪微博 腾讯微博 人人网 开心网 豆瓣网 网易微博 摘????要： 车集煤矿2612工作面回采期间揭露DF078正断层 (260°300°∠40°70°, H=025.5 m) , 受大落差断层影响48—79号架全岩, 50—80号架最大坡度33°, 运输巷标高高出回风巷24.1 m, 存在爆破作业量大、大坡度施工危险性高、设备管理难度大、输送机上行运输等问题, 不利于工作面的安全高效开采。结合矿井实际生产情况, 研究了2612工作面过大落差断层回采方案和回采层位调整技术, 确定工作面采用挑顶卧底法平推硬过断层, 大坡度段采取挑顶起溜技术, 按25°调整回采层位, 并优化爆破作业施工组织。结果表明:工作面实现连续开采, 避免了工作面改造、搬家, 工作面坡度最大降幅8°, 提高了大坡度施工安全系数, 同时多回收煤炭资源3.93万t, 技术经济效益显著, 研究结果为类似条件下工作面过大落差断层提供了实践参考。 关键词： 大落差断层布置; 回采制约因素; 回采方案制定; 回采层位调整; 大坡度施工; 作者简介：王玉新 (1985—) , 男, 河北唐山人, 工程师, 2008年毕业于中国矿业大学, 现从事生产技术管理工作。 收稿日期：2017-07-17 Research on mining technology of fully-mechanized coal mining face with large spread and large drop Wang Yuxin Chen Huiming Yang Yuefei Juji Coal Mine, Yongcheng Coal and Electricity Co., HNEC; Abstract： Ju Ji coal mine was exposed to DF078 normal fault ( 260 ° ~ 300 °∠40 ° ~ 70 °, H = 0 ~ 25.5 m) during the mining period of 2612 working face, affected by the large drop fault 48 ~ 79 full rock, 50 ~ 80 frame maximum slope of 33°, under the road elevation higher than the upper 24.1 m, there is a large amount of blasting operations, high slope construction of high risk, equipment management was difficult, transport transport and other issues, was not conducive to the safe and efficient mining face.Combined with the actual production of the mine, the study of the 2612 working face over the large drop fault mining program and mining level adjustment technology to determine the face of the use of the top of the undercover method to push hard over the fault, the large slope section to take top pull technology, adjust the mining level, and optimize the blasting operation of the construction organization.The results show that the working face can realize the connection and mining, which avoids the transformation of the working face, the moving and the slope of the working face decreases by 8°, and improves the safety factor of the large slope, at