变速恒频风力发电系统故障特性与保护技术分析-analysis on fault characteristics and protection technology of variable speed constant frequency wind power generation system.docx

experiments verifies the “multi-waveform” fault characteristics of DFIG current fed into the grid, which is due to the multi rotor exciting models. Based on this, a grid connecting-point protection scheme for wind farm is proposed. The scheme was composed of advanced current protection and low voltage protections, which can not only reliably remove the fault, happened on the tie line, but also ensure the wind farm to operate under fault condition. The proposed protection scheme is of great significance to realizing the reliable operation and fast fault restoration of the grid with high penetration wind generators.To further increase the wind turbines LVRT ability from the grid side, feeder protection and reclose action strategies were improved. For preventing wind farm caused mis-operation , this paper proposes that check the maximum wind short-circuit current level, or add complementary elements of the direction for feed current relay. From the Angle of feeder to prevent overvoltage, two kinds of technology solutions were puts forward, for help realizing the cooperate principle between reclosing and interconnection of wind power. At last the simulation results verify the effectiveness of the proposed measures, can make full use of wind power.With The high penetration of DG integration, traditional current protection operation condition could be more complicated and security and stability problem would be more austere in large-scale interconnected power source. The paper constructs a new protection system using the wide-area information to indentify the fault location.Introduced the protection system structure and function division, discussed the core of protection system - based on wide area information for fault location algorithm .a numerical example is given to illustrate the wide-area protection system based on the information can be more effectively determine the fault location, and this methods can guarantee the safe and stable operation of power grid under