磁流变胶泥的制备及其性能分析1-preparation and performance analysis of magnetorheological cement 1.docxVIP

  • 5
  • 0
  • 约5.52万字
  • 约 62页
  • 2018-07-05 发布于上海
  • 举报

磁流变胶泥的制备及其性能分析1-preparation and performance analysis of magnetorheological cement 1.docx

磁流变胶泥的制备及其性能分析1-preparation and performance analysis of magnetorheological cement 1

重庆大学硕士学位论文重庆大学硕士学位论文英文摘要 PAGE PAGE VIABSTRACTMagnetorheological material, as a kind of magnetic controlled smart material, mainly includes magnetorheological fluids, magnetorheological elastomers, magnetorheological plastomer, magnetorheological grease, etc.. It can be used in vibration isolator and buffer for construction, automotive, medical, military and other fields. However, the defects of magnetorheological materials limit their applications. For the problems of sedimentation, low shear yield stress of magnetorheological fluids, narrow controllable range of magnetorheological elastomers and magnetorheological plastomer, oil separation and poor stability of the temperature of magnetorheological grease. In this paper, based on the preparation of magnetorheological materials, we proposed a new kind of magnetorheological material, magnetorheological elasticity cement (MREC). It adopted elasticity cement as carrier, the main component of which is a high degree of polymerization of linear polysiloxane. And we carried out the relevant studies about magnetic induced properties, preparation technology, mechanical properties, viscoelastic properties. Specific as follows:①Magnetorheological materials and their application prospects were analyzed. Tosolve problems of magnetorheological materials in the engineering application, a new kind of magnetorheological material which named MREC was put forward. The main component of elasticity cement is a high degree of polymerization of linear polysiloxane.②Based on the microstructure of MREC and field-induced magnetic dipole theory,a model for magnetic induced shear stress of single chain was proposed. And the angle between chain and the magnetic field direction was assumed to be exponential distribution, then the analysis model of magnetic induced shear stress was obtained. It is shown that the magnetic induced shear stress is proportional to the volume fraction of particles, the square of the magnetic field. Other factors such

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档