超声磁致伸缩换能器驱动电源的研究电气工程专业论文.docxVIP

超声 超声磁致伸缩换能器驱动电源的研究 河北 河北工业大学硕士学位论文 PAGE PAGE iv PAGE PAGE iii RESEARCH OF DRIVING POWER FOR ULTRASONIC MAGNETOSTRICTIVE TRANSDUCER ABSTRACT Ultrasonic magnetostrictive transducer is a mechanical device that transforms electromagnetic energy into mechanical vibration by using giant magnetostrictive material.It has a good prospect in the industrial, biomedical, and military defense industries , because its characteristics are compact, high energy density and high output power. However, relative to other countries, China in the ultrasonic magnetostrictive transducer research is also part of the fledgling stage.Therefore, the development of new type driving power for ultrasonic magnetostrictive transducer has important practical significance for wide application of ultrasonic magnetostrictive transducers. This paper gives the structure of ultrasonic magnetostrictive transducer ，analyse the ultrasonic magnetostrictive transducer by four-terminal network method. First, this paper analyzes equivalent circuit of magnetostrictive rod by electromechanical analogy, then we can obtain the equivalent circuit of ultrasonic magnetostrictive transducer plus front cover, back cover, and coil. So ultrasonic magnetostrictive transducer is a inductive load. this paper also design the hardware part of ultrasonic magnetostrictive transducer. The hardware part consists of rectifier filter circuit, full-bridge inverter circuit ,the auxiliary power supply and protection circuit. The rectifier part uses single-phase bridge rectifier, the filter part use aluminum electrolytic capacitor.the contravariant part uses series resonance by the analysis of series resonance and parallel resonance. Auxiliary power supply use Shanghai Asanas JS158. This paper obtain power control strategy through static and dynamic matching analysis of the driving power and ultrasonic magnetostrictive transducer,then propose a theory of coupled oscillations and obtain the relationship between transducer