高速电磁阀性能分析与仿真-研究.pdfVIP

摘 要 到最大加速度所对应的电磁阀衔铁内外径的最优尺寸参数。在此基础上开发 和研制出新型的高速电磁阀。 关键词：电磁阀 电磁铁 数学模型 仿真 CST MATLAB II 万方数据 ABSTRACT ABSTRACT Since the 1960’s , with the rapid development of microelectronics technology , control system used for electricity, liquid and gas which is characterized by the rapid response , strong anti-pollution and low-cost be needed more and more . In particularly, the development of the automobile industry accelerated this need, including car engine fuel injection system, wheel antilock brakes, clutch of automatic control, a variety of techniques is to use the solenoid valve. The solenoid valve is a digital control components, with direct computer docking, which greatly improves the control of the convenience, so that a more extensive application of the solenoid valve. The development of such electronic components is an urgent need for the development of industrial modernization. The main research contents of this paper are as follows: 1. The electromagnet is a core part of the solenoid valve, the structure of the electromagnet, materials, etc. on the performance of the solenoid valve has a fundamental impact. This project is to analyze the structure of the electromagnet. On the basis of the Maxwell equation, corresponding to a different structure, we established a mathematical model .By Kirchhoff’s law of magnetic circuit made of the magnetic circuit analysis, and the preliminary design is presented. 2. Sub-ring