酒钢选矿厂强磁工艺流程优化研究-冶金工程专业论文.docxVIP

西安建筑科技大学硕士论文酒钢选矿厂强磁工艺流程优化研究 西安建筑科技大学硕士论文 酒钢选矿厂强磁工艺流程优化研究 p幻700{ 专 业：冶金工程 硕士生：唐晓玲 指导老师：张治元教授 高振满高工 吕宪俊教授 摘 要 酒钢选矿厂强磁生产系统采用一粗二扫工艺流程处理桦树沟粉矿，目前，生产中 存在着精矿品位及回收率均较低的问题。一方面，矿物嵌布粒度细，而选厂磨矿细度 不够，导致精矿品位偏低：另一方面，选别设备采用的是仿琼斯型磁选机，由于该设 备对一37微米铁矿物不能有效回收，致使选厂尾矿品位较高，金属回收率低。 随着强磁选设备的发展，美国研制的铁轮式永磁高梯度磁选机对微细粒级弱磁性 铁矿物具有较好的回收效果。根据酒钢矿石性质的特点．并结合国内外贫红铁矿选矿 生产实践，进行了强磁一高梯度、强磁一高梯度粗细分选及强磁、高梯度阶段磨选流程 的试验研究，目的是利用永磁高梯度磁选机对酒钢选矿工艺流程进一步优化，达到精 矿品位和回收率双提高的目的。 通过对几种流程的技术指标及经济效益的方案对比，确定了强磁、高梯度阶段磨 选流程为最优流程．其技术指标为：精矿品位48．49％，回收率85．12％．选矿比1．60 倍，与原一粗二扫流程相比，吨精矿成本降低9．88元，年增加效益1446．13万元。 关键词：铁矿强磁选高梯度磁选机流程优化 论文类型：应用技术 I 西安建筑科技大学硕士论文Abstract 西安建筑科技大学硕士论文 Abstract The once primary processing and twice processing technology has been used to process the powder ore of Huashugou in the high Strong_magnetism processing fields production system of the mineral processing plant of Jiuquan Iron and Steel Company．At present，the problems of 10wer concentrate grade and recovery rate exist in the production．On one hand，the mineral particlos size are smaller and the grinding particles size of mineral processing plant is insufficient， These caused the concentrate grade i s]ower．On the other hand，the Jones high intensity magnetic separator has been used in the mineral processing plant． The less then 37 micron iron ore can not be recovered by thi s kind of equipment sufficiently．So the tailing grade is higher，the metal recovery rate is Iower． With the development of the high intensity magnetic separator，the permanent magnetic high gradient separator manufactared by the USA has better result to the micro particles low intensity magnetic minerals．Based on the features of our iron ore，and also consider the mineral processing of low grade red iron ore producti∞practice of home and abroad，the experiment and study of the high intensity—high gradient、the high magnetic—high gradient thick and thin classification processing、the high magnetic—high gradient stage griding—and—separation technology have been made．The purpose is to make use of