上海通用汽车到港海外集装箱拉动方式优化-工业工程专业论文.docxVIP

上海交通大学工程硕士学位论文AB 上海交通大学工程硕士学位论文 ABSTRACT - - PAGE IV- THE OVERSEAS CONTAI NER PULLI NG METHOD OPTI MI ZATI ON OF SHANGHAI GENERAL MOTORS ABSTRACT The overseas parts of Shanghai General Motors are transported to SGM mainly by Container method. When containers arrived shanghai port, SGM authorized the third part logistics supplier, Shanghai TongHui Re-Distribution center, to pull material into RDC warehouse according to SGM production plan and RDC inventory, ensure the overseas parts inventory of RDC can satisfied SGM production requirement. The study starts from the current RDC inventory, reach the conclusion that the pulling method have impact on the inventory level, the reason of high overseas crate area, then analysis the principle of pulling container. After finishing the reason, I analysis the main reason of RDC pulling system, then try to change the old method, which parts match container, to the new method, which container match parts. The new method can realize the object of pulling least container with least Non-demand parts. First, I create the concept of Use Percentage of Container, the percentage of the part which is needed by SGM, this is the main Parameter for selection. Second, according to the UPC, to design various Algorithms, create the related math model, implement by computer program and Simulate the program in the environment same as the SGM production, which means the real input of SGM actual production plan, parts inventory, the container timing, simulate the quantity of various pulling method, then compare with the current RDC algorithm. Finally, pick up the best method then take it into action, to decrease the inventory level of RDC overseas parts inventory. KEY WORDS: inventory, use percentage of container, pulling method, pulling algorithm 附件四 附件四 上海交通大学 学位论文原创性声明 本人郑重声明：所呈交的学位论文，是本人在导师的指导下，独立进行研究 工作所取得的成果。除文中已经注明引用的内容外，本论文不包含任何其他个人 或集体已经发表或撰写过的作品成果。对本文的研究做出重要贡献的个人和集 体，均已在文中以明确方式标明。本人完全意识到本声明的法律结果由本人承担。 学位论文作者签名：董文