用访问列表初步管理IP流量培训PPT课件.ppt

Slide 1 of 3 Purpose: Layer 1—Shows the command syntax to declare a named IP access list. Emphasize: Show how to use named access lists, a new approach to configuring access lists in Cisco IOS software. Slide 3 of 3 Purpose: Layer 3—Finishes with the new form of the access group command, now able to refer to an IP access list name as well as an access list number. Emphasize: Introduced with Cisco IOS Release 11.2, named access lists: Intuitively identify IP access lists using alphanumeric identifiers. Remove the limit on the number of access lists (previously 99 for IP standard and 100 for IP extended access lists). Allow per-access-list-statement deletions (previously the entire numbered access list needed to be deleted as a single entity). Require Cisco IOS Release 11.2 or later. Slide 1 of 1 Purpose: Emphasize: Slide 1 of 1 Purpose: Emphasize: Explain the basic rules on where to configure standard and extended access lists. Describe how the extended access list can eliminate unwanted traffic across the serial lines. Slide 1 of 1 Purpose: This slide shows how to verify an access list. Emphasize: Lists IP interface information. Indicates whether outgoing access list is set. Review the output of the show ip interface command. The highlighted text shows details about access list settings in the show command output. Slide 1 of 1 Purpose: This slide introduces the show access-lists command used to verify access lists. Emphasize: This is the most consolidated method for seeing several access lists. Note, the implicit deny all statement is not displayed unless it is explicitly entered in the access-list. Slide 1 of 1 Purpose: Emphasize: Use the summary page items to review the chapter material you presented. Slide 1 of 1 Purpose: Emphasize: Notes: Refer to the appendix for answer to the review questions. Slide 1 of 1 Purpose: Emphasize: Slide 1 of 2 Purpose: Emphasize: This graphic give your students a simplified perspe