显示器后盖产品开发设计及模具设计.docVIP

广东科学技术职业学院 PAGE PAGE 1 显示器后盖产品开发设计及模具设计 摘 要：毕业设计是在修完所选课程之后，我们走向社会之前的一次综 合性设计。应用所学的专业知识独立完成课题。注射成型加工质量的 优劣是塑料加工业技术发展水平的标志之一，同时反映了模具设计和制造的水平。本文根据显示器后盖的设计要求，分析了注塑模具设计与制造的特点，介绍了注塑模具的设计方法和流程。首先对塑件进行工艺性分析并拟定模具结构形式；然后选择注射机并对型腔数量及注射机有关工艺参数进行校核；接着确定成型方案：浇注系统设计、成型零件的结构设计、模架的确定、脱模结构的设计、侧向分型与抽芯结构的设计、导向结构和复位结构的设计以及温度调节系统的设计等。最后分析模具的整个工作过程及其可靠性。 关键词：显示器后盖；注塑模；模具三维设计；模具结构；CAE；UG Abstract:Graduation project is a comprehensive design.in completing the selected course, we go before the community To apply our professional knowledge to complete tasks independently. Advantages and disadvantages of processing quality of injection molding is one sign of the level of plastic processing industry technological development, while reflecting the level of mold design and manufacturing.This paper, according to the design requirements of display back top，analyzes the design and manufacturing features of injection mould，and introduces the method of injection mould design as well. First of all, analyze the craft characteristic ofplastic and study out the form of mold structure. Secondly，select right injection machineand check on the number of cavities and the process parameters of the injection machine.Then, determine the shape scheme, which contains the design of feed system, thestructural design of forming parts, the confirmation of mould base, the design of ejectionstructure, lateral-parting with core-pulling structure, oriented structure as well astemperature-regulating system. Finally, analyze the whole working process of the mouldand its reliability throughout the process. Keywords: display back; injection mould; mold tridimensiona design;the form of mold structure;CAE;UG PAGE 31 TOC \o 1-3 \h \z \u 1 引 言 1 1．1 国际、国内塑料模具成型发展概况 1 1．2 塑料模具设计方法主要发展方向 3 1．3 塑料模具的分类 5 1．4 毕业设计思想简述 5 2 塑料制件的工艺性分析及工艺结构设计 9 2．1 塑件的工艺性分析 9 2．1．2塑件结构及成型工艺性分析： 10 2．2 拟定模具结构形式 11 2．2．1成型方案的确定 11 2．2．2分型面位置的确定 11 2．2．3确定型腔数量及排列方式 11 2．2．4模具结构形式的确定 11 3 选择注射机及注射机相关参数校核 12 3．1 注