CJSJ-200齿轮复合加工机床电气控制系统设计.doc

毕业设计说明书（论文）中文摘要 摘要： 摘要： 本文主要进行了CJSJ-200齿轮复合加工机床电气控制的设计。主要用的数控系统为西门子828D数控系统,利用此数控系统的紧凑型，简单好用，实现最佳表面质量和高速高精度的和谐统一来进行电气控制的设计。对于齿轮复合加工电气控制设计主要是通过设计系统PLC程序来控制整个系统的驱动，来直接控制机床的各个部件，各个动作准确可靠而且运动精度很高。另外对于齿轮复合加工的研究也是很有实际用途的，既减少了工序，又提高了效率和精度，未来复合加工机床的推广和应用也会越来越多。本课题主要先根据设计要求设计出电气控制原理图，结合数控系统和设计要求进行PLC程序设计，根据PLC梯形图的控制程序并且安装驱动系统，分析出系统调试过程中所会出现的问题，设置相关的参数以及综合调试，从而能够实现齿轮复合加工。 关键词：西门子828D PLC程序设计 齿轮复合加工 Title CJSJ-200 gear compound machine tool electrical control design Title CJSJ-200 gear compound machine tool electrical control design Abstract The article mainly has carried on the CJSJ-200 gear compound machine tool electrical control design. Mainly used for SIEMENS 828D of NC system,using the numerical control system of the compact, simple to use, realize the harmony of the best surface quality and high speed and high precision for the design of electrical control. For gear composite processing and electric control design is mainly through PLC program design system to control the drive of the whole system,to directly control the machine tool parts, various and precise action and movement precision is very high. In addition to the research on composite processing gear is also of great practical use, both reduces the working procedure,and improves the efficiency and accuracy, further promotion and application of composite machine tools will be more and more. The trapezoidal diagram of PLC control program and install the drive system, analysis of the program in the process of system debugging, set the related parameters and integrated debugging, which can realize complex machining of gear. Keywords SIEMENS 828D; The PLC program design;Gear composite processing 目 录 TOC \o 1-3 \h \u 6221 前 言 1 28639 第一章 绪论 2 17532 1.1引言 2 8538 1.2齿轮加工方法及齿轮复合加工机床 2 29840 1.3国外数控机床的发展状况及前景 3 4018 1.3.1国外数控机床发展状况 3 18800 1.3.2国外数控机床发展前景 4 24182 1.4选题的意义与研究内容 4 28051 1.5本文的结构 5 22240 第二章 数控系统分析及数控机床硬件配置 7 4989 2.1数控系统的基本概念 7 32460 2.1.1数控机床主要加工原理 7 31064 2.2西门子828D系统组成与连接