WorleyParsons 沃利帕森斯设计指南 KS-PR-DEG-0137 PID Development Design Guide.pdfVIP

PID Development Design Guide Document No: KS-PR-DEG-0137 Rev 0 01 December 2019 © Copyright 2019 Worley ACN 096 090 158. No part of this document or the information it contains may be reproduced or transmitted in any form or by any means electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, withou t permission in writing from Worley. Table of Contents 1. Introduction 5 2. Scope 5 3. Piping and Instrumentation Diagram (PID) 5 4. PID General Requirements 7 4.1 PID Sources of Information 7 4.2 PID – Contents 7 4.3 PID – Drafting Requirements 9 4.3.1 General Part 9 4.3.2 Technical Part 9 4.4 PID – Utility Distribution / Collecting Systems. 13 4.5 PID – Outside Plot 13 4.6 PID – Modifications to Existing Installations 15 4.6.1 New Scope (Construction Schemes) 15 4.6.2 Demolition Schemes 15 4.6.3 Clarification Mark 15 4.6.4 Phased Project Scope 15 5. PID - Preparation 16 5.1 Operating Cases 17 5.1.1 Normal Operation 17 5.1.2 Special Operating Cases 17 6. Lines and piping 22 6.1 Types of Lines 22 6.2 Line Components 23 6.2.1 Pipe Fittings 23 6.2.2 Pipe End Closures 24 6.2.3 Items for Operation and Maintenance 25 6.3 Insulation and Protective Heating 25 6.3.1 Insulation 25 6.3.2 Protective Heating 26 6.4 Pipe Routing and Layout Requirements 28 6.4.1 Pipe Routing and Layout – General Requirements 29