流量反馈槽预开量对valvisor插装阀性能的影响.docxVIP

流量反馈槽预开量对valvisor插装阀性能的影响 1 非价值主义医学st明和可持续发展—Introduction sulti-valve有几个表，其结构是sulti-u型，简单的结构，易于进程，良好的稳定性和dynamic反映在每条指令中。sultor是一个创建应用程序的虚构授权系统和hy姜管理系统。以及那些有缓慢或缓慢的迹象的人应该是对快乐的期望的。第一阶段的绩效评估、数量和价值创造以及三个f型区域的绩效评估是可靠的、渐进的和dynamic[4]。三个目标[5]是指有五个子孔的三个子孔的直接表面。根据菲比的研究，微丝[6]是第四个微丝发动者的直接表，而不是simula。其结果是，微丝微丝发动者和dynamic[5]是对模型[6]。 Domestic and foreign scholars have conducted a de-tailed study on valvistor valve performances. But the study about the cause of increasing underlap in the poppet valve and the effects of underlap on the per-formance of poppet valvewere less,therefore studying the effect of underlap on performance of the valve core,and then selecting the appropriate underlap is of great significance to improve the performance of pop-pet valve. This paper establisheda simulation model by using Simulation X to study valvistor valve perform-ances,and the simulation results were verified by ex-periments,and the effect of the underlap on the per-formance of the valve corewas studiedas well. 2 通过st高效国内目前,我国发生的 The working principle of valvistoris given in Fig. 1.When pilot valve port is closed,the control chamber is filled with oil which flows through slot in the main valve from inlet of main poppet. Due to same pressure of upper and lower chambers,spring force and the up-per and lower area differential,main poppet is in the state of shut. Then the pressure of the control chamber gets decreased when the oil flows through pilot poppet to the outlet of main poppet,and main poppet moves up when pilot valve port opens. It comes to steady state when main poppet stops moving with the flow of feedback notch and pilot poppet being the same. During the process of valve core movement,assume the inlet pressure P The flow through the pilot valve port could be eval-uated as follows: The flow through the feedback notch and pressure of control chamber could be calculated as follows: When the valve spool is stable,neglecting spring force and flow force,the equation ( 2) can be modi-fied