软母线连接变电站设备抗震设计方法研究.pdfVIP

母线连接变电站设备抗震设计方法研究 1 1 陈辉 ，谢强 1.同济大学建筑工程系，上海市，200092 Earthquake Resistant Design Method of Substation Equipment Interconnected By Flexible Buswork 1 1 CHEN Hui , XIE Qiang (1.Department of Building Engineering, Tongji University, Shanghai 200092, China) ABSTRACT: Great tension may generate in Tension; Shake table test; Earthquake resistant design flexible buswork when electrical equipment 摘要：在地震动作用下，软母线连接的变电站设备 interconnected by flexible buswork suffered 结构特性不 时，可能产生反向运动的趋势，从而 earthquake. In order to study the interaction 在母线中产生较大的拉力作用。为了研软母线连接 betweenthe flexible busywork and the 变电站设备的抗震性能，对具有不 垂跨比的软母 connected equipment, shaking table tests on 线连接的220kV 断路器与隔离开关的真型设备进行 real substation equipment interconnected by 了振动台试验，提取设备瓷瓶根部的应变响应，从 real flexible buswork was carried out The 而得到设备顶端母线附加水平力的大小。试验结 tension generated in flexible buswork under 显示：当软母线的垂跨比在16%和25%时，母线中 earthquake input was analyzed. When the sag 的张力较小；当地震动峰值为 0.25g 时，母线中的 to span ratio of flexible buswork were 16% 张力在Landers 波输入下达到最大值162N。当软母 and 25%, the tension generated in flexible 线的垂跨比为6%时，相对于垂跨比为 16%和25% buswork was small, and the maximum tension 的情况母线中的拉力显著增大；母线中的张力在 generated in flexible buswork is 162N