Specific Radioactivity of Neutron Induced Radioisotopes Assessment Methods and Application for Medically Useful 177Lu Production as a Case 英文参考文献.docVIP

Molecules 2011, 16, 818-846; doi:10.3390/moleculeOPEN ACCESS molecules ISSN 1420-3049 /journal/molecules Article Specific Radioactivity of Neutron Induced Radioisotopes: Assessment Methods and Application for Medically Useful 177Lu Production as a Case Van So Le ANSTO Life Sciences, Australian Nuclear Science and Technology Organization, New Illawarra Road, Lucas Heights, P.M.B 1 Menai, NSW 2234, Australia; E-Mail: slv@.au; Tel.: +61297179725; Fax: +61297179262 Received: 25 November 2010; in revised form: 10 January 2011 / Accepted: 17 January 2011 / Published: 19 January 2011 Abstract: The conventional reaction yield evaluation for radioisotope production is not sufficient to set up the optimal conditions for producing radionuclide products of the desired radiochemical quality. Alternatively, the specific radioactivity (SA) assessment, dealing with the relationship between the affecting factors and the inherent properties of the target and impurities, offers a way to optimally perform the irradiation for production of the best quality radioisotopes for various applications, especially for targeting radiopharmaceutical preparation. Neutron-capture characteristics, target impurity, side nuclear reactions, target burn-up and post-irradiation processing/cooling time are the main parameters affecting the SA of the radioisotope product. These parameters have been incorporated into the format of mathematical equations for the reaction yield and SA assessment. As a method demonstration, the SA assessment of 177Lu produced based on two different reactions, 176Lu (n,γ)177Lu and 176Yb (n,γ) 177Yb (β- decay) 177Lu, were performed. The irradiation time required for achieving a maximum yield and maximum SA value was evaluated for production based on the 176Lu (n,γ)177Lu reaction. The effect of several factors (such as elemental Lu and isotopic impurities