爱家板是种什么产品,为什么叫爱家板(What kind of product is a family board Why is it called a family board).docVIP

  • 4
  • 0
  • 约8.56千字
  • 约 6页
  • 2017-08-04 发布于河南
  • 举报

爱家板是种什么产品,为什么叫爱家板(What kind of product is a family board Why is it called a family board).doc

爱家板是种什么产品,为什么叫爱家板(What kind of product is a family board Why is it called a family board) What kind of product is a family board? Why is it called a family board? What is a family board? A: the family board is a kind of compound decorative board, which covers a layer of special treatment on the base of the particle board, which has the surface of anti-engraving, wear-resisting, flame retardant and acid and alkali. It is called the MELANINE FACE HIPBOARD, which is used in raw materials, such as kraft paper, colored paper and melamine. Widely used in board furniture and kitchen furniture. It is particularly popular in Europe, which focuses on conservation and environmental protection. The family board is designed and produced by FritzEGGER Gmbh Co, one of the largest decorative board manufacturers in Austria. The family has been registered in China. What is a V313? Answer: the so-called V313 is the high moisture-proof M. F. C board in Europe. The detection process is as follows: A, V313 material testing (wet cycling test) (1) three days of immersion in water above 20 degrees (2) refrigerate one day at minus 12 degrees Celsius. (3) dry three days in a temperature environment of more than 70 degrees. (the process is repeated three times). After the above procedures are completed, the board will be climate-controlled in the relative humidity of 65% and 20 degrees, and then the material coefficient of its tension, strength and swelling ratio will be detected. Its expansion rate is less than 6%. The difference between a home plate and a fire board Answer: (1) fire prevention board for the kraft paper, color paper and three poly amine hydrogen chemical raw materials, such as the English abbreviation for HPL, manufacturing into different refractory plate thickness first, and then after two processing, with rubber paste after pressure on particieboard or medium density board base material element. (2) the gravity release of the two processes causes different degrees of defor

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档