BELT Continental Screw（带 大陆螺丝）.pdf

Belt Conveyor INSTALLATION, OPERATION Maintenance and Safety Manual CONTINENTAL BELT CONVEYOR SYSTEMS By CONTINENTAL SCREW CONVEYOR A Subsidiary of IPS Group, Inc. 4343 Easton Road Phone: 816-233-1800 sales@ St. Joseph, MO 64503 Fax: 816-233-8315 NOTE – Safety instructions contained within are basic guidelines and should be considered as minimum provisions. Additional information shall be obtained by the purchaser from other sources including the latest editions of American Society of Mechanical Engineers; Standard ANSI B20.1; Standard ANSI B15.1; Standard ANSA A12.1; Standard ANSI MH4.7; Standard ANSI Z244.1-1982. Installation, Operation, Maintenance and Safety Manual Page 1 Suggested Installation, Operation, Maintenance and Safety Procedures applicable to Continental Belt Conveyor Systems Equipment This is a general guideline for the operation, maintenance and safety procedure for belt conveyors manufactured by Continental Belt Conveyor Systems (CBCS). It is intended to provide general engineering information on belt conveyors and is not intended to circumvent or modify any information supplied by the manufacture of any of the purchased components supplied with this equipment. The information contained herein should be made available to be studied by any of your plant and office personnel who may be expected to operate, inspect, work on - or in any way come in contact with this equipment. This should be done prior to putting the equipment into operation. INSTALLATION Prior to receiving the equipment you normally will be furnished with a general arrangement drawing provided by CBCS of your equipment layo