T型钢连接的高延性钢结构梁柱节点有限元分析和设计方法探讨-结构工程专业论文.docxVIP

汕头大学硕士论文 汕头大学硕士论文 II II ABSTRACT There are many types of beam-to-column connections for high-rise steel buildings. In conventional analysis and design of steel frames, it is usually assumed that the connections are either rigid or pinned. In fact, the great majority of connections does not exhibit such idealized behavior. Top and seat- T-stub with double web-angle connections are typical semi-rigid connections. Through the beam and column connection with T–stub of parametric studies, one hope to get influence of the optimal design method. This thesis introduced the types of semi-rigid connection, the research of semi-rigid connections, level and development, and described the study of semi-rigid beam-to-column connections related theory and finite element method. This paper had chosen an engineering project, beam-to-column connections for seismic design. The finite element analysis software ABAQUS was used to conventional hole model simulation analysis, and multiple models of stress, bending moment - rotation curve, ductility coefficient and energy dissipation and plastic rotation made comparison and analysis, and some useful conclusions were obtained. Finally on the basis of this work, the unsolved problems of this thesis were put forward. Keywords：T-STUB； high ductility；seismic behavior；finite element III III 目 录 摘要 I HYPERLINK \l _bookmark0 ABSTRACT II HYPERLINK \l _bookmark1 目 录 III HYPERLINK \l _bookmark2 第一章 绪论 1 HYPERLINK \l _bookmark3 1.1 研究背景及国内外研究现状 1 HYPERLINK \l _bookmark4 1.1.1 梁柱半刚性连接的重要性 1 HYPERLINK \l _bookmark5 1.1.2 半刚性连接节点的类型 1 HYPERLINK \l _bookmark6 1.1.3 半刚性连接节点的类型特点 5 HYPERLINK \l _bookmark7 1.1.4 半刚性节点的研究现状 7 HYPERLINK \l _bookmark8 1.1.5 半刚性连接性能的研究方法 8 HYPERLINK \l _bookmark9 1.1.6 国内半刚性连接节点的研究现状 9 HYPERLINK \l _bookmark10 1.1.7 国外半刚性连接节点的研究现状 10 HYPERLINK \l _bookmark11 1.2 本课题的研究意义和研究内容 12 HYPERLINK \l _bookmark12 第二章 半刚性节点计算的几种常用模型 13 HYPERLINK \l _bookmark13 2.1 引言 13 HYPERLINK \l _bookmark14 2.2 半刚性连接性能的研究方法 14 H